Dislocated double-layer metal gratings: an efficient unidirectional coupler.

نویسندگان

  • Tianran Liu
  • Yang Shen
  • Wonseok Shin
  • Qiangzhong Zhu
  • Shanhui Fan
  • Chongjun Jin
چکیده

We propose theoretically and demonstrate experimentally a dislocated double-layer metal grating structure, which operates as a unidirectional coupler capable of launching surface plasmon polaritons in a desired direction under normal illumination. The structure consists of a slanted dielectric grating sandwiched between two gold gratings. The upper gold grating has a nonzero lateral relative displacement with respect to the lower one. Numerical simulations show that a grating structure with 7 periods can convert 49% of normally incident light into surface plasmons with a contrast ratio of 78 between the powers of the surface plasmons launched in two opposite directions. We explain the unidirectional coupling phenomenon by the dislocation-induced interference of the diffracted waves from the upper and lower gold gratings. Furthermore, we developed a simple and cost-effective technique to fabricate the structure via tilted two-beam interference lithography and subsequent shadow deposition of gold. The experimental results demonstrate a coupling efficiency of 36% and a contrast ratio of 43. The relatively simple periodic nature of our structure lends itself to large-scale low-cost fabrication and simple theoretical analysis. Also, unlike the previous unidirectional couplers based on aperiodic structures, the design parameters of our unidirectional coupler can be determined analytically. Therefore, this structure can be an important component for surface-plasmon-based nanophotonic circuits by providing an efficient interface between free-space and surface plasmon waves.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Substrate-Embedded and Flip-Chip-Bonded Photodetector Polymer-Based Optical Interconnects: Analysis, Design, and Performance

The performance of three optoelectronic structures incorporating substrate-embedded InP-based inverted metal–semiconductor–metal photodetectors and/or volume holographic gratings are analyzed and compared at the primary optical communication wavelengths. These structures, in conjunction with optical-quality polymer layers, can be easily integrated into silicon microelectronic substrates for the...

متن کامل

A submicron broadband surface-plasmon-polariton unidirectional coupler

The manipulation of light propagation is a basic subject in optics and has many important applications. With the development of nano-optics, this area has been downscaled to wavelength or even subwavelength scales. One of the most efficient ways to control light propagation is to exploit interference effects. Here, by manipulating the interference between two nanogrooves on a metal surface, we ...

متن کامل

Ultrahigh Contrast One-Way Optical Transmission Through a Subwavelength Slit

We computationally demonstrate one-way optical transmission characteristics of a subwavelength slit. We comparatively study the effect in single layer and double layer metallic corrugations. We also investigate the effect of a dielectric spacer layer between double corrugations to control the volumetric coupling of plasmon and optical modes. We computationally show unidirectional transmission b...

متن کامل

Improving the sensing performance of double gold gratings by oblique incident light.

Here we demonstrate a simple method to improve the plasmonic sensing performance of gold gratings. The gratings consist of periodic polymer gratings covered with a gold layer, created by nanoimprint lithography and metal deposition. We investigated the effect of gold thickness and the incident angles on the plasmonic sensing performance. With the optimized gold layer, the full-width at half max...

متن کامل

Design and optimization of poly lactic acid/bioglass composite screw for orthopedic applications

However, problems such as osteoporosis due to high elasticity of metals relative to bones, and local infections and systemic problems caused by releasing metallic ions have motivated research on replacing metallic screws with non metallic ones. In this study, the composite containing poly-l-lactic acid and bioactive glass fibers were considered for the design of the screw using ABAQUS software ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Nano letters

دوره 14 7  شماره 

صفحات  -

تاریخ انتشار 2014