Production and Operations Management: Models and Algorithms

ثبت نشده
چکیده

This chapter intends to give an overview of the literature on dynamic lot-sizing models and stochastic transshipment models. These two types of models are used as a basis for developing models with substitution in the following chapters. Section 2.1 contains a classification of models for dynamic lot-sizing / production planning, and selected models. In Sect. 2.2, we give a brief overview of available methods for solving deterministic dynamic lot-sizing problems modeled using mixed-integer linear programming (MILP). Section 2.3 introduces transshipment problems and presents a classification scheme for transshipment models. Section 2.4 reviews selected solution approaches that can be applied to stochastic inventory control models such as transshipment problems. Dynamic lot-sizing models and transshipment models are linked to certain planning tasks in an Advanced Planning System (APS): In the conceptual framework of Advanced Planning and the Supply Chain Planning (SCP) matrix (Fleischmann et al., 2005, p. 87) that is shown in Fig. 2.1, the combined lot-sizing and scheduling models considered in this work cover the planning tasks lot-sizing and machine scheduling. In addition, they are linked to the topic short-term sales planning, as a Capable-To-Promise (CTP) logic (Fleischmann et al., 2005, p. 91, Kilger and Schneeweiß, 2005, p. 185) could make use of the models to check whether customer orders could be fulfilled. Also, some lot-sizing models include supplier selection, capacity planning and other mid-term/tactical planning tasks in addition to shortterm planning tasks. Transshipment models are used to optimize short-term planning tasks related to warehouse replenishment, transport planning, and short-term sales planning: Transshipments are executed to fulfill customer demands in case of local stock-outs. These replenishments from warehouses on the same echelon have to be implemented using available transportation capacities. Thus, in the software architecture of an APS (a generic, idealized architecture is shown in Fig. 2.2), the lot-sizing models considered in this work will most likely be used for optimization in a Production Planning and/or Scheduling software module. Transshipment models would be used for the optimization of operational decisionmaking in the Transport Planning and Demand Fulfilment & Available-To-Promise (ATP) software modules. For details on the functionalities and architectures of APS, the reader is referred to Meyr et al. (2005a,b).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation-Base Multi- Objective Risk Management for Optimal Wind Turbines Placement: Case of Khodabandeh City

The main purpose of this study is to provide three simulation-based risk management models for optimal placement of wind turbines in Khodabandeh city (located in the south of Zanjan province) taking into account the wake effect and uncertainty in wind speed and direction. For this purpose, wind speed and direction data were collected, then wind speed and direction uncertainty was modeled by Mon...

متن کامل

Simulation-Base Multi- Objective Risk Management for Optimal Wind Turbines Placement: Case of Khodabandeh City

The main purpose of this study is to provide three simulation-based risk management models for optimal placement of wind turbines in Khodabandeh city (located in the south of Zanjan province) taking into account the wake effect and uncertainty in wind speed and direction. For this purpose, wind speed and direction data were collected, then wind speed and direction uncertainty was modeled by Mon...

متن کامل

Modelling and solving the job shop scheduling Problem followed by an assembly stage considering maintenance operations and access restrictions to machines

This paper considers job shop scheduling problem followed by an assembly stage and Lot Streaming (LS). It is supposed here that a number of products have been ordered to be produced. Each product is assembled with a set of several parts. The production system includes two stages. The first stage is a job shop to produce parts. Each machine can process only one part at the same time. The second ...

متن کامل

Simulated annealing and artificial immune system algorithms for cell formation with part family clustering

Cell formation problem (CFP) is one of the main problems in cellular manufacturing systems. Minimizing exceptional elements and voids is one of the common objectives in the CFP. The purpose of the present study is to propose a new model for cellular manufacturing systems to group parts and machines in dedicated cells using a part-machine incidence matrix to minimize the voids. After identifying...

متن کامل

Optimization of profit and customer satisfaction in combinatorial production and purchase model by genetic algorithm

Optimization of inventory costs is the most important goal in industries. But in many models, the constraints are considered simple and relaxed. Some actual constraints are to consider the combinatorial production and purchase models in multi-products environment. The purpose of this article is to improve the efficiency of inventory management and find the economic order quantity and economic p...

متن کامل

No-idle time Scheduling of Open shops: Modeling and Meta-heuristic Solution Methods

In some industries as foundries, it is not technically feasible to interrupt a processor between jobs. This restriction gives rise to a scheduling problem called no-idle scheduling. This paper deals with scheduling of no-idle open shops to minimize maximum completion time of jobs, called makespan. The problem is first mathematically formulated by three different mixed integer linear programming...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2018