Helium Adsorption on Lithium Substrates

نویسندگان

  • E. Van Cleve
  • J. E. Rutledge
چکیده

We have developed a cryogenic pulsed laser deposition (PLD) system to deposit lithium films onto a quartz crystal microbalance (QCM) at 4 K. Adsorption isotherms of 4He on lithium were measured in the temperature range between 1.42 K and 2.5 K. The isotherms are qualitatively different from isotherms on strong substrates such as gold and weak substrates such as cesium. There is no evidence of the formation of solid-like layers of helium, and the helium coverage is approximately linear in the pressure over a wide range. By measuring the low coverage slope of the isotherms, the binding energy of helium to lithium was found to be approximately −13.6 K. For lithium substrates less than approximately 100 layers thick, the chemical potential at which the superfluid transition was observed was surprisingly sensitive to the details of lithium deposition.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and construction of a helium purification system using cryogenic adsorption process

One of the most appropriate methods for elimination of trace impurities in helium is cryogenic adsorption process. So, in this study design and construction of cryogenic adsorption helium purification system (3 Nm3.hr-1, 80 bar) carried out using activated carbon as adsorbent at 77K. To evaluation of adsorption dynamics and effect of pressure on elimination of trace impurities, helium purificat...

متن کامل

Synthesis of Lithium Ion Sieve Nanoparticles and Optimizing Uptake Capacity by Taguchi Method

Spinel-type of MnO2 nanoparticles which successfully synthesized by a hydrothermal process, have a required capacity for lithium uptake from liquid resources. Themost lithium adsorption capacity of 6.6 mmol/g of up to now was found to be an important limiting parameter for industrial applications. Therefore, increasing uptake capacity of these ion sieve...

متن کامل

Enhancement of Methane Adsorption by Lithium Doping into Metal-Organic Framework Cu-BDC

Copper (II) carboxylate, (Cu-BDC), metal-organic-framework (MOF) has been synthesized undersolvothermalconditions and used as a new adsorbent for the methane. The Lithium doping intoCu-BDC, (Li-Cu-BDC), is made by impregnating Cu-BDC with an ethanol solution ofLiNO3, followed by heat treatment in vacuum. The adsorbent was characterized by X-ray diffraction (XRD), Fourier transform infrared ...

متن کامل

Enhanced Absorption and Diffusion Properties of Lithium on B,N,VC-decorated Graphene

Systematic first-principles calculations were performed to investigate the adsorption and diffusion of Li on different graphene layers with B/N-doping and/or C-vacancy, so as to understand why doping heteroatoms in graphene anode could significantly improve the performance of lithium-ion batteries. We found that the formation of single or double carbon vacancies in graphene are critical for the...

متن کامل

A MATHEMATICAL MODEL FOR PRESSURE SWING ADSORPTION D.J.G. Sebastian BOC Limited, UK I. Introduction Pressure Swing Adsorption (PSA) as a physical method of separa-

As an illustration, consider the following two-step adsorption cycle to purify helium diving gas. Helium diving gas is principally a mixture of oxygen and helium, when the diving chambers are depressurised, the contaminated gas will consist mainly of carbon dioxide, oxygen and helium. Traditionally this waste gas has been thrown away. The PSA cycle described below is a method of purifying this ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007