Pulse Shaping vs. OFDM Transmission Techniques for InHome Power Line Communications
نویسندگان
چکیده
The nature of the transmission medium (the electrical cable) and possible power/interference constraints coming from coexistence issues, forces Power Line Communication (PLC) signals to respect some emission limits [1, Chap.5]. Within this framework, pulse shaping may offer effective solutions to maximize Signal-to-Interference-Noise Ratio (SINR), while abiding by spectral constraints. The model of the received signal is given by
منابع مشابه
Performance Improvement in OFDM System by PAPR Reduction Using Pulse Shaping Technique
Orthogonal Frequency Division Multiplexing (OFDM) is an efficient method of data transmission for high speed communication systems. However, the main drawback of OFDM system is the high Peak to Average Power Ratio (PAPR) of the transmitted signal. OFDM consist of large number of independent subcarriers, as a result of which the amplitude of such signal can have high peak values. Pulse shaping u...
متن کاملIntercarrier Interference of Various Pulse Shaping Functions Used in OFDM Systems with Carrier Frequency Offset
For orthogonal frequency-division multiplexing (OFDM) communication systems, the frequency offsets in mobile radio channels distort the orthogonality between subcarriers resulting in intercarrier interference (ICI). This paper is focused on the problem of reducing the intercarrier-interference (ICI), signal to noise ratio and improved performance in the transmission over OFDM using various puls...
متن کاملTransmitter Pulse Shaping to Reduce OOB Power and ICI in OFDM Systems
The goal of waveform shaping techniques in orthogonal frequency division multiplexing systems is reduction in out of band (OOB) transmit power as well as reduction in inter-carrier interference (ICI) generated by carrier frequency offset at the receiver. We propose waveform shaping using a linear combination of time-limited polynomial pulses having spectral decay rates of 1=f 4 and 1=f . The re...
متن کاملComparison of ConvOFDM and Wavelet–OFDM for Narrow–Band Power Line Communications
Systems for Power Line Communications (PLC) mostly apply multicarrier modulations in order to cope with the time dispersive nature of the power line transmission channel. In the emerging IEEE 1901.1 standard on broad–band communications via power line, two alternative techniques, conventional OFDM (convOFDM) and Wavelet–OFDM, are included. However, up to now, only convOFDM systems can be found ...
متن کاملComparison of OFDM and Single Carrier Transmission in Power Line Communications
Orthogonal frequency division multiplexing (OFDM) is a suitable candidate for broadband power line communications (PLC). It has shown that the Bit Error Rate (BER) performance of Single Carrier Transmission with Frequency Domain Equalization (SCT-FDE) is close to OFDM in broadband wireless systems. In this paper we investigate the BER performance of SCT employing time and frequency domain decis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011