A new dental superalloy system. I. Theory and alloy design.
نویسندگان
چکیده
Basic factors that influence the physical metallurgy and the mechanical properties of cobalt-base alloys are discussed in this study; these factors include the coherency of the interphase interface, the stacking fault energy, and the average electron hole number. Control of these factors and considerations of corrosion resistance and body compatibility determined the compositions for alloys that fulfill dental requirements.
منابع مشابه
A new dental superalloy system. II. Mechanical properties.
Theoretical considerations that lead to the design of strong and ductile cobalt (Co)base alloys were discussed in part I of this series of articles.' It was hypothesized that the composition 40 Co-30 nickel (Ni)-30 chromium (Cr) is an acceptable compromise for the requirements of an alloy base. It also was found that tantalum (Ta) may have the qualities that are acceptable for an additional ele...
متن کاملA new dental superalloy system. IV. X-ray diffraction analysis.
X-ray diffraction analysis of the alloy system Co-Ni-Cr-Ta showed that the ternary alloy base consisted of three phases (a, ,8, and v-). Addition of Ta caused a decrease in the intensity of the 3 lines. Further Ta additions caused diffraction lines characteristic of the intermetallic compound a-Co3Ta. At higher Ta concentrations, the intensity of the lines characteristic of the aphase increased...
متن کاملA new dental superalloy system. 3. Microstructure and phase transformations.
A microstructural study was conducted on 15 cobalt-chromium-nickel alloys of the basic composition 40 Co-30 Ni-30 Cr. The alloys were strengthened by the addition of tantalum and tantalum-rich regions were found at the interdendritic spaces. The increase in Ta concentration caused a decrease in the concentration of the a phase and an increase in the amounts of the a phase. Excessive amounts of ...
متن کاملBoriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation
In this study, mechanism and kinetic of formation of boride layer on In-738 superalloy were investigated via diffusion pack cementation method. Boriding was carried out at 900 °C for several short times (5, 15, 45 and 60 min). Phase study by means of X Ray defragtion (XRD) indicated that in addition to Ni3B, other phases such as Cr5B3, AlB2, and W2B were formed at the first period of process, a...
متن کاملModeling and Simulation of Alloy 718 Microstructure and Mechanical Properties
Alloy 718 is a unique superalloy that has been in use for a number of years. It also has the distinction to be utilized throughout the aerospace and general industrial communities. The applications for this material are often very unique and require tailoring of the microstructure and subsequently the mechanical properties to meet these specific needs. To support optimization of Alloy 718 mecha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of dental research
دوره 52 1 شماره
صفحات -
تاریخ انتشار 1973