Point Laser Triangulation Probe Calibration for Coordinate Metrology
نویسندگان
چکیده
Point Laser Triangulation (PLT) probes have significant advantages over traditional touch probes. These advantages include throughput and no contact force, which motivate use of PLT probes on Coordinate Measuring Machines (CMMs). This document addresses the problem of extrinsic calibration. We present a precise technique for calibrating a PLT probe to a CMM. This new method uses known information from a localized polyhedron and measurements taken on the polyhedron by the PLT probe to determine the calibration parameters. With increasing interest in applying PLT probes for point measurements in coordinate metrology, such a calibration method is needed. @S1087-1357~00!01703-2#
منابع مشابه
Indoor GPS Metrology System with 3D Probe for Precision Applications
There is an increasing demand from industry for intelligent reverse engineering solutions. The requirement is to be able to perform reverse engineering, to create CAD models, or to compare prototypes with CAD models. A reverse engineering solution that can be used for 6 degrees of freedom pose measurement in a large area is desired. With this application in mind, we have developed a ‘3D Probe’ ...
متن کاملModelling and Calibration Technique of Laser Triangulation Sensors for Integration in Robot Arms and Articulated Arm Coordinate Measuring Machines
A technique for intrinsic and extrinsic calibration of a laser triangulation sensor (LTS) integrated in an articulated arm coordinate measuring machine (AACMM) is presented in this paper. After applying a novel approach to the AACMM kinematic parameter identification problem, by means of a single calibration gauge object, a one-step calibration method to obtain both intrinsic-laser plane, CCD s...
متن کاملCalibration Methods for 3D Measurement Systems
This paper was published in Proceeding of SPIE Medical Imaging Conference and is made available as an electronic reprint with permission of SPIE. One copy or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or mo...
متن کاملDynamic Performance of Vibrometer Steering System for Dynamic In-Fight Tracking and Measurement
Noncontact dynamic measurements of lightweight flexible aerospace structures in motion present several challenges. Achieving high frequency and high resolution measurements requires multiple registered metrology systems. Many noncontact measurement methods are based on the object staying aligned with the sensor. Yet sometimes the desired loading is a result of the motion interacting with struct...
متن کاملOptimal Path Planning for Helical Gear Profile Inspection with Point Laser Triangulation Probes
New commercial Point Laser Triangulation (PLT) probes enable Coordinate Measuring Machines (CMMs) to take faster, noncontact, accurate measurements. In this paper, we address how to apply this technology to inspect helical gears. Traditionally, gears are inspected with slow, costly, and dedicated machines. The proposed flexible inspection system with a fast measuring probe can significantly red...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000