Radially and azimuthally polarized nanosecond Yb-doped fiber MOPA system incorporating temporal shaping.

نویسندگان

  • D Lin
  • N Baktash
  • M Berendt
  • M Beresna
  • P G Kazansky
  • W A Clarkson
  • S U Alam
  • D J Richardson
چکیده

We report an Yb-doped fiber master-oscillator power-amplifier (MOPA) system with the capability of selectively generating doughnut-shaped radially and azimuthally polarized beams with user-defined temporal pulse shapes. The desired output polarization was generated with the aid of a nanograting spatially variant half-waveplate (S-waveplate). The latter was used to convert the linearly polarized fundamental (LP01) mode output from the preamplification stages to a doughnut-shaped radially polarized beam prior to the power amplifier stage. A maximum output pulse energy of ∼860  μJ was achieved for ∼100  ns pulses at 25 kHz with user-defined pulse shape for both radial and azimuthal polarization states. The polarization purity and beam propagation factor (M2) were measured to be >12  dB and 2.2, respectively.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Radially polarized Yb-fiber MOPA producing 10 W output using SLM based pulse shaping for efficient generation of arbitrary shaped picosecond pulses

We demonstrate beyond 10W simultaneous temporal and spatial pulse-shaping on a picosecond fiber laser system. Our proposed technique can substantially enhance the capability and efficiency of the existing ultrashort fiber laser systems for high precision material processing. OCIS codes: (140.0140) Lasers and laser optics; (140.3070) Infrared and far-infrared lasers; (140.3300) Laser beam shapin...

متن کامل

High Peak Power, Single-polarized, Sub-nanoseconds Pulses Generation of a Yb-doped Rod-type Photonic Crystal Fiber Amplifier

We report a high-peak-power, single-polarized master oscillator power amplification system employing polarizationmaintaining Yb-doped rod-type photonic crystal fiber. The MOPA system comprises of a Q-switched microchip laser generating ~630ps pulses at 8.6 kHz repetition-rate and two amplification stages employing double cladding fiber and rod-type PCF respectively. The MOPA system obtains narr...

متن کامل

SBS management in Yb-fiber-amplifiers using multimode seeds and pulse-shaping.

We present a comprehensive analysis of the technique of Longitudinal-Mode-Filling (LMF) to reduce Stimulated Brillouin Scattering (SBS) limitations in Ytterbium Doped Fibre Amplifiers (YDFA), for the generation of nanosecond, temporally shaped pulses. A basic Master-Oscillator-Power-Amplifier (MOPA) system, comprising an output YDFA with 10 µm-core active fibre, is experienced for benchmarking ...

متن کامل

Amplifying nanosecond optical pulses at 1053 nm with an all-fiber regenerative amplifier.

Nanosecond, 1053 nm optical pulses are amplified from 15 pJ to 240 nJ by a Yb-doped all-fiber regenerative amplifier (AFRA), achieving an overall gain of 42 dB. To the best of our knowledge, this is the highest output-pulse energy from an AFRA ever reported. Techniques for suppressing amplified spontaneous emission are employed to favor the signal gain 23 nm off the gain peak of the Yb-doped fi...

متن کامل

An all-fiber PM MOPA pumped high-power OPO at 3.82μm based on large aperture PPMgLN

We report a large aperture PPMgLN based OPO generating 21W of average output power at a slope efficiency of 45%, pumped by the output from a polarization maintaining Ytterbium doped fiber MOPA operating at 1060nm producing 58W of average output power and 20ns pulses at a repetition rate of 100kHz. A maximum of 5.5W of optical power was recorded at the idler wavelength of 3.82μm without thermal ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics letters

دوره 42 9  شماره 

صفحات  -

تاریخ انتشار 2017