TrackCC: A Practical Wireless Indoor Localization System Based on Less-Expensive Chips

نویسندگان

  • Xiaolong Li
  • Yan Zheng
  • Jun Cai
  • Yunfei Yi
چکیده

This paper aims at proposing a new wireless indoor localization system (ILS), called TrackCC, based on a commercial type of low-power system-on-chip (SoC), nRF24LE1. This type of chip has only l output power levels and acute fluctuation for a received minimum power level in operation, which give rise to many practical challenges for designing localization algorithms. In order to address these challenges, we exploit the Markov theory to construct a ( l + 1 ) × ( l + 1 ) -sized state transition matrix to remove the fluctuation, and then propose a priority-based pattern matching algorithm to search for the most similar match in the signal map to estimate the real position of unknown nodes. The experimental results show that, compared to two existing wireless ILSs, LANDMARC and SAIL, which have meter level positioning accuracy, the proposed TrackCC can achieve the decimeter level accuracy on average in both line-of-sight (LOS) and non-line-of-sight (NLOS) senarios.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Plils: A Practical Indoor Localization System through Less Expensive Wireless Chips via Subregion Clustering

Reducing costs is a pragmatic method for promoting the widespread usage of indoor localization technology. Conventional indoor localization systems (ILSs) exploit relatively expensive wireless chips to measure received signal strength for positioning. Our work is based on a cheap and widely-used commercial off-the-shelf (COTS) wireless chip, i.e., the Nordic Semiconductor nRF24LE1, which has on...

متن کامل

A Routing-Aware Simulated Annealing-based Placement Method in Wireless Network on Chips

Wireless network on chip (WiNoC) is one of the promising on-chip interconnection networks for on-chip system architectures. In addition to wired links, these architectures also use wireless links. Using these wireless links makes packets reach destination nodes faster and with less power consumption. These wireless links are provided by wireless interfaces in wireless routers. The WiNoC archite...

متن کامل

Design and Analysis of a Bluetooth-Based Indoor Localization System

The emerging context-aware applications relying on the wireless networking, require the availability of network services that provide even simple notions of context as position and identity. In the last few years several localization and tracking systems for indoor environment have been proposed. However, these systems are often very expensive since they require the installation of dedicated in...

متن کامل

On the Analysis of Localization Accuracy of Wireless Indoor Positioning Systems using Cramer's Rule

This paper presents an analysis of the localization accuracy of indoor positioning systems using Cramer’s rule via IEEE 802.15.4 wireless sensor networks. The objective is to study the impact of the methods used to convert the received signal strength into the distance that is used to compute the object location in the wireless indoor positioning system. Various methods were tested and the loca...

متن کامل

Design and Implementation of an Indoor Positioning System Based on Wireless Sensor Networks

The positioning technologies play a crucial role in the application of wireless sensor networks. In this paper, based on research TI CC2530 chip and ZigBee protocol stack, using Received Signal Strength Indication and the trilateration positioning technology, the wireless sensor network indoor positioning system was achieved. Take CC2530 chip as the control core, the system hardware was realize...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 17  شماره 

صفحات  -

تاریخ انتشار 2017