ELECTROMAGNETIC AND MECHANICAL FINITE ELEMENT ANALYSIS OF END REGION OF LARGE-SIZED THREE-PHASE SQUIRREL-CAGE INDUCTION MACHINES Doctoral Dissertation
نویسندگان
چکیده
OF DOCTORAL DISSERTATION AALTO UNIVERSITY SCHOOL OF SCIENCE AND TECHNOLOGY P.O. BOX 11000, FI-00076 AALTO http://www.aalto.fi Author Ranran Lin 林然然 Name of dissertation Manuscript submitted 31 March 2010 Manuscript revised 28 June 2010 Date of defence 17 September 2010 Article dissertation (summary + original articles) Monograph Faculty Department Field of research Opponent Supervisor Instructor Abstract
منابع مشابه
Characterization of Power Transformer Electromagnetic Forces Affected by Winding Faults
Electromagnetic forces in power transformer windings are produced by interaction between the leakage fluxes and current passing them. Since the leakage flux distribution along the windings height is in two axial and radial directions, so the electromagnetic forces have two components, radial and axial. There is a risk that a large electromagnetic force due to the short circuit or inrush current...
متن کاملElectromechanical interaction in rotordynamics of cage induction motors
Electromagnetic fields in the air gap of an electric machine produce electromagnetic forces between the rotor and stator. The total force exerted on the rotor due to the eccentric rotor position is called the unbalanced magnetic pull. This eccentricity force is directed roughly over the shortest air gap. At low frequencies, the vibration amplitudes of flexural modes may be large enough to coupl...
متن کاملA New Subdomain Method for Performances Computation in Interior Permanent-Magnet (IPM) Machines
In this research work, an improved two-dimensional semi-analytical subdomain based method for performance computation in IPM machine considering infinite-/finite-magnetic material permeability in pseudo-Cartesian coordinates by using hyperbolic functions has been presented. In the developed technique, all subdomains are divided into periodic or non-periodic regions with homogeneous or non-homog...
متن کاملAnalytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
Electromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groov...
متن کاملA Method for Parameters Estimation in Induction Motor Drives
The paper presents an estimation method for the electromagnetic and mechanical parameters of squirrel cage induction motor. The main result consists in the use of an improved dynamic model that allows also the estimation of the iron loss. The estimated parameters are obtained with accuracy higher than the one from the classical tests. The parameters can be used in the implementation of control ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010