Performance Analysis of High Grade M19 Silicon Steel Core for Distribution Transformer
نویسندگان
چکیده
With increasing competition in the global market continuous research are done to optimize the behavior of materials to be used in transformer. Since silicon (Si) comprises a very good crystallographic arrangement then that of iron (Fe), silicon is fused with iron for considerable reduction of leakage flux in it. A novel M19 high grade silicon steel core has been introduced for 1 KVA 415/230V delta to star connected distribution transformer and stray losses are estimated using Ansys Maxwell. The obtained results are validated by experimental test. KeywordM19 Silicon Core, Straylosses, Eddy Current, Distribution Transformer __________________________________________________________________________________________________
منابع مشابه
A Glance into the Future of Transformers ... and Beyond
An overview of the research and developments into new transformer design, undertaken in the Department of Electrical and Computer Engineering, University of Canterbury, is presented. Initially, single phase, 50 Hz, l1/0.23kV pole mount distribution transformers were fitted with either silicon or amorphous steel cores. The transformer tanks were filled with either standard transformer oil or liq...
متن کاملModelling transformer core joints using Gaussian models for the magnetic flux density and permeability
Simple equivalent permeability and reluctance models are obtained for the transformer core joints from the analysis of the magnetic flux. It is shown that the flux variations in the joint zone can be fitted with simple Gaussian expressions suitable for transformer design purposes. These models are derived from 2D and 3D finite element simulations. The magnetic flux distribution in the transform...
متن کاملEfficiency Improvements in Transformers by Adoption of New Magnetic Material
Since independence in India there has always been shortage of electricity and at no point of time we have been able to meet the peak demand. The gap between the demand and generation can be bridged/ minimized by either improving the installed capacity or reducing the consumer demand. The gap between availability & demand is of order 6% as on date. If we take into account the issues like environ...
متن کاملNonlinear Model of Tape Wound Core Transformers
Recently, tape wound cores due to their excellent magnetic properties, are widely used in different types of transformers. Performance prediction of these transformers needs an accurate model with ability to determine flux distribution within the core and magnetic loss. Spiral structure of tape wound cores affects the flux distribution and always cause complication of analysis. In this paper, a...
متن کاملEfficiency Improvement of the Flyback Converter Based on High Frequency Transformer Winding Rearrangement
In this paper, a novel method for loss reduction and efficiency optimization of the high frequency flyback transformers is proposed based on rearrangement of the windings. According to detailed analysis of the high frequency flyback transformer using FEM technique, a novel and simple approach for its design improvement and loss reduction is introduced. It is shown that leakage flux scattering i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2018