Estimation of GPS Carrier Phase Multipath Signals Based on Site Environment
نویسندگان
چکیده
This paper presents a method that is based on Electromagnetic Modeling (EM) technique for modelling GPS carrier phase multipath signals. A commercial software plus modules developed in-house are used for modeling and processing carrier phase multipath error parameters. Static multipath modeling experiments show that up to about 35% carrier phase errors and about 25% 3D positioning errors can be reduced.
منابع مشابه
Carrier phase analysis to mitigate multipath effect
Although researchers have devised different methods to detect and correct effects of multipath, it remains one of the challenges in navigation receiver design. This paper explores the phase variations of the incoming carrier in the presence of multipath in GPS signals. Due to this change, while tracking an incoming signal, energy is shifted from the I channel to the Q channel. A novel technique...
متن کاملLau, Lawrence (2017) Wavelet packets based denoising method for measurement domain repeat-time multipath filtering in GPS static high-precision positioning. GPS
Repeatable satellite orbits can be used for multipath mitigation in GPS-based deformation monitoring and other high-precision GPS applications that involve continuous observation with static antennas. Multipath signals at a static station repeat when the GPS constellation repeats given the same site environment. Repeat-time multipath filtering techniques need noise reduction methods to remove t...
متن کاملStudy on Carrier Phase Tracking Receivers in Difficult GPS Environments – Issues on Signal to Noise Ratio and Signal Acquisition
Current applications of GPS typically require the antenna of the user’s receiver to have a clear view of sky in order to acquire and track the line-ofsight signals. However, there is an increasing interest in using GPS indoors or in environments where there may be signal blockage. These include general applications where the GPS signals are likely to be severely attenuated, such as emergency ‘E...
متن کاملGPS TOOLBOX An open source GPS multipath simulator in Matlab/Octave
Multipath is detrimental for both GPS positioning and timing applications. However, the benefits of GPS multipath for reflectometry have become increasingly clear for monitoring soil moisture, snow depth, and vegetation growth. In positioning applications, a simulator can support multipath mitigation efforts in terms of, e.g., site selection, antenna design, receiver performance assessment, and...
متن کاملMitigation of Static Carrier Phase Multipath Effects Using Multiple Closely-Spaced Antennas
The effect of carrier phase multipath in static mode is investigated and a system is developed to reduce the effect using multiple closely-spaced antennas. The correlated nature of multipath, along with the known geometry among the antennas, are used with the measured relative carrier phase differences to aid in the extraction of the direct carrier phase from the multipath-corrupted carrier pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007