Optical contamination screening of materials with a high-finesse Fabry-Perot cavity resonated continuously at 1.06- microm wavelength in vacuum.
نویسندگان
چکیده
An optical-loss measurement system based on a resonant Fabry-Perot cavity at 1.06 microm in vacuum has been developed for independent monitoring of the cavity total loss and the optical absorption loss. Maintenance of cavity resonance over a one-month period allows the assessment of long-term degradation of the cavity optics in the presence of outgassing materials, with sensitivities of 5 ppm/yr for total cavity loss and 2 ppm/yr for cavity absorption loss. Test results for light-emitting diodes, Kapton-insulated cable assemblies, and Vac-seal epoxy adhesive are given. Scaling of these results to the optical performance requirements of LIGO is discussed.
منابع مشابه
Stable, mode-matched, medium-finesse optical cavity incorporating a microcantilever mirror: optical characterization and laser cooling.
A stable optical resonator has been built using a 30-microm-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7-mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a near-hemispherical configuration, a Fabry-Perot cavity with a finesse equal to 55 was achieved. The finesse was limited by the optical loss in the cantilever's metal coati...
متن کاملEfficient Bragg-like operation of intracavity low-efficiency plane gratings
The diffraction regime of a thin grating inserted in a Fabry–Perot cavity is investigated. Our calculations show that, at Bragg incidence, a single diffraction order can be selectively enhanced, giving rise to a very efficient Bragg-like diffraction regime. The optimization of the device is studied as a function of the resonator thickness and finesse and the grating position inside the Fabry–Pe...
متن کاملA Theoretical Study and Numerical Simulation of a Quasi-Distributed Sensor Based on the Low-Finesse Fabry-Perot Interferometer: Frequency-Division Multiplexing
The application of the sensor optical fibers in the areas of scientific instrumentation and industrial instrumentation is very attractive due to its numerous advantages. In the industry of civil engineering for example, quasi-distributed sensors made with optical fiber are used for reliable strain and temperature measurements. Here, a quasi-distributed sensor in the frequency domain is discusse...
متن کاملNanofiber Fabry-Perot microresonator for nonlinear optics and cavity quantum electrodynamics.
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings that enclose a subwavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F=86 while the on-resonance transmission is T=11%. The characteristics of our resonator fulfill the req...
متن کاملOn-Chip High-Finesse Fabry-Perot Microcavities for Optical Sensing and Quantum Information
For applications in sensing and cavity-based quantum computing and metrology, open-access Fabry-Perot cavities-with an air or vacuum gap between a pair of high reflectance mirrors-offer important advantages compared to other types of microcavities. For example, they are inherently tunable using MEMS-based actuation strategies, and they enable atomic emitters or target analytes to be located at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied optics
دوره 38 25 شماره
صفحات -
تاریخ انتشار 1999