Switching phase separation mode by varying the hydrophobicity of polymer additives in solution-processed semiconducting small-molecule/polymer blends
نویسندگان
چکیده
منابع مشابه
Phase-Destabilization Mechanism of Polymer-Modified Bitumens in Quiescent Annealing
Bitumen as a binder in coating and insulating materials is modified with polymers to improve its performance in service conditions. Almost all polymers are incompatible with bitumen, and at high temperatures due to relatively very low viscosity of the bitumen phase, are separated from it. These lead to a considerable limitation in the use and handling of polymer-modified bitumens. An understand...
متن کاملOrganic Semiconductor/Insulator Polymer Blends for High-Performance Organic Transistors
We reviewed recent advances in high-performance organic field-effect transistors (OFETs) based on organic semiconductor/insulator polymer blends. Fundamental aspects of phase separation in binary blends are discussed with special attention to phase-separated microstructures. Strategies for constructing semiconductor, semiconductor/dielectric, or semiconductor/passivation layers in OFETs by blen...
متن کاملInkjet-Printed Organic Transistors Based on Organic Semiconductor/Insulating Polymer Blends
Recent advances in inkjet-printed organic field-effect transistors (OFETs) based on organic semiconductor/insulating polymer blends are reviewed in this article. Organic semiconductor/insulating polymer blends are attractive ink candidates for enhancing the jetting properties, inducing uniform film morphologies, and/or controlling crystallization behaviors of organic semiconductors. Representat...
متن کاملFactors Governing Intercalation of Fullerenes and Other Small Molecules Between the Side Chains of Semiconducting Polymers Used in Solar Cells
© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinh wileyonlinelibrary.com While recent reports have established signifi cant miscibility in polymer:fullerene blends used in organic solar cells, little is actually known about why polymers and fullerenes mix and how their mixing can be controlled. Here, X-ray diffraction (XRD), differential scanning calorimetry (DSC), and molecular simulations are us...
متن کاملConjugated-Polymer Blends for Optoelectronics
Solution-processed polymer optoelectronic devices such as light-emitting diodes and solar cells have many advantages for large-area manufacture, and show increasing levels of performance. Here, we review recent progress in using blends of two conjugated polymers for optoelectronic devices. The blending of two or more polymers allows tuning of device performance, and for photovoltaics presents a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013