Seismic Resistance and Damping Model Test and Numerical Simulation of Highway Tunnel
نویسندگان
چکیده
In this paper,we established a seismic resistance and damping model to study the effects of tunnel under seismic waves.We took the entrance of Galongla Tunnel as prototype, drafted the similarity relationships of the model.Damping layers and the measuring points of shaking table model have been arranged. We carried out loading test of the shaking table. Compared with the results of finite element analysis, the damping ratio has been defined to analyze the dynamic characteristics and the effect of damping layers. We come to conclusion that damping layers have some effects and surrounding rocks can filter high frequency components of the seismic waves.
منابع مشابه
Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck
To protect the driver of off-highway dump trucks from the harmful vibration, this paper presents the comparison results to determine the optimal damping of the seat system by different optimization design plans. Three optimization schemes are considered including individually optimizing the damping of the cushion, individually optimizing the damping of the seat suspension, and integrately optim...
متن کاملThe study of seismic resistance of rubber-metal supports
This research reveals the efficiency of seismic isolation system in the form of rubber-metal supports with different height buildings at multi component seismic impact. As an example, seismically insulated monolithic reinforced concrete 5, 9 and 16 story buildings are considered. The solution of the problem is obtained by a direct integration of the motion equations for an explicit scheme in fi...
متن کاملEffect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method
Although segmental tunnel linings are often used for seismic areas, the influence of segment joints on the segmental lining behavior under seismic loading has not been thoroughly considered in the literature. This paper presents the results of a numerical study investigating the effects of the rotational, axial, and radial joint stiffness of the longitudinal joints on the structural force...
متن کاملDesign Algorithm of a Free Surface Water Tunnel to Test the Surface-Piercing Propellers (SPP); Case Study Water Tunnel of Babol Noshirvani University of Technology
Surface-Piercing Propellers (SPPs) have been widely used in high speed craft due to some desirable features such as high efficiency, omission of resistance of equipment attached to the propeller and proper functioning of cavitation. Unlike the submerged propellers, theoretical methods have no significant application on simulation of SPPsbecause of problems related to modeling of these propeller...
متن کاملA Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design
In the present paper, a supersonic wind-tunnel is designed to maintain a flow with Mach number of 3 in a 30cm×30cm test section. An in-house CFD code is developed using the Roe scheme to simulate flow-field and detect location of normal shock in the supersonic wind-tunnel. In the Roe scheme, flow conditions at inner and outer sides of cell faces are determined using an upwind biased algorithm. ...
متن کامل