Choosing an Appropriate Sensor for the Designed Shm System Based on Lamb Waves Propagation
نویسندگان
چکیده
JANUSZ OCHONSKI Department of Robotics and Mechatronics AGH University of Science and Technology Al. Mickiewicza 30, 30-059 Kraków [email protected] LUKASZ AMBROZINSKI Department of Robotics and Mechatronics AGH University of Science and Technology Al. Mickiewicza 30, 30-059 Kraków [email protected] ANDRZEJ KLEPKA Department of Robotics and Mechatronics AGH University of Science and Technology Al. Mickiewicza 30, 30-059 Kraków [email protected] TADEUSZ UHL Department of Robotics and Mechatronics AGH University of Science and Technology Al. Mickiewicza 30, 30-059 Kraków [email protected] TADEUSZ STĘPIŃSKI. Signals and Systems Uppsala University P O Box 534 SE – 751 21 Uppsala Sweden
منابع مشابه
Ultrasonic Guided Waves Based Method for Shm – Simulations and an Experimental Test
Guided waves based methods are widely used for damage detection and localization in metallic and composite structures. Success of the method application depends on many factors like sensors/actuators location, sensor electronic system design, sensor shape, frequency range of excitation waves and applied signal processing procedures. Authors developed new modified LISA and EFIT algorithms to sol...
متن کاملMircea Calomfirescu Lamb Waves for Structural Health Monitoring in Viscoelastic Composite Materials
Structural Health Monitoring (SHM) is a novel philosophy for an autonomous, built-in nondestructive evaluation of structural “health” on demand to reduce life-cycle costs, increase safety and reduce structural weight. This dissertation investigates ultrasonic guided waves, particularly Lamb waves, and their propagation properties as a method to perform Health Monitoring of viscoelastic composit...
متن کاملApplication of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification
A Lamb wave-based crack detection method for aluminum plates health monitoring is developed in this paper. Piezoelectric disks are employed to actuate and capture the Lamb wave signals. The position of crack is assumed to be aligned with the sensor and actuator. Extraction of high quality experimental results of lamb wave propagation in a plate-like structure is considerably complicated due to...
متن کاملGuided wave propagation in composite laminates using piezoelectric wafer active sensors
Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., electro-mechanical impedance method; and (c) passive detection. The focus of this paper is on the cha...
متن کاملExperimental characterisation of Lamb wave propagation through thermoplastic composite ultrasonic welds
Ultrasonic welding is a very promising technique for joining thermoplastic composite (TpC) components in aircraft primary structures [1, 2]. The potential introduction of new lightweight structures in civil aviation has been driving the change towards condition-based maintenance (CBM) as an alternative to the regular inspection interval approach [3]. In turn, CBM has been pushing forward the de...
متن کامل