3D Integration Technology for Lab-on-a-Chip Applications
نویسندگان
چکیده
A review is presented of advances and challenges in fully integrated systems for personalised medicine applications. One key issue for the commercialisation of such systems is the disposability of the assay-substrate at a low cost. This work adds a new dimension to the integrated circuits technology for lab-on-a-chip systems by employing 3D integration for improved performance and functionality. It is proposed that a disposable biosensing layer can be aligned and temporarily attached to the 3D CMOS stack by the vertical interconnections, and can be replaced after each measurement.
منابع مشابه
Direct laser writing of sub-50 nm nanofluidic channels buried in glass for three-dimensional micro-nanofluidic integration.
We report on the fabrication of nanofluidic channels directly buried in silicate glass with transverse widths down to less than 50 nm using three-dimensional (3D) femtosecond laser direct writing. Using this technique, integrated micro-nanofluidic systems have been produced by simultaneously writing micro- and nanofluidic channels arranged into various 3D configurations in glass substrates. The...
متن کاملHigh efficiency integration of three-dimensional functional microdevices inside a microfluidic chip by using femtosecond laser multifoci parallel microfabrication
High efficiency fabrication and integration of three-dimension (3D) functional devices in Lab-on-a-chip systems are crucial for microfluidic applications. Here, a spatial light modulator (SLM)-based multifoci parallel femtosecond laser scanning technology was proposed to integrate microstructures inside a given 'Y' shape microchannel. The key novelty of our approach lies on rapidly integrating ...
متن کاملCMOS Circuits and Systems for Lab‐on‐a‐Chip Applications
Complementary metal oxide semiconductor (CMOS) technology allows the functional integration of sensors, signal conditioning, processing circuits and development of fully electronic integrated lab‐on‐a‐chip. On the other hand, lab‐on‐a‐chip is a technology which changed the traditional way by which biological samples are inspected and tested in laboratories. A lab‐on‐a‐chip consists of four main...
متن کاملRapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing.
The creation of complex three-dimensional (3D) microfluidic systems has attracted significant attention from both scientific and applied research communities. However, it is still a formidable challenge to build 3D microfluidic structures with arbitrary configurations using conventional planar lithographic fabrication methods. Here, we demonstrate rapid fabrication of high-aspect-ratio microflu...
متن کاملLab-on-a-chip device made by autohesion-bonded polymers
Polymers have the obvious advantages of flexibility in design and cost effectiveness to fabricate a lab-on-a-chip (LOC) device. Polyether ether ketone (PEEK) in particular is very attractive choice as it adds biocompatibility in addition to the possibility of hematic sealing in a 3D design. Hereby, we extend our previous successful technology of autohesive hermetic bonding of medical implants i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011