Cross contamination of metal working fluid systems
نویسنده
چکیده
منابع مشابه
A Liquid-Metal Based Spiral Magnetohydrodynamic Micropump
A liquid-metal based spiral magnetohydrodynamic (MHD) micropump is proposed in this work. The micropump was fabricated in a polydimethylsiloxane (PDMS)-glass hybrid microfluidic chip. This pump utilized two parallel liquid-metal-filled channels as electrodes to generate a parallel electrical field across the pumping channel between the two electrodes. To prevent contact and cross contamination ...
متن کاملPermeation of a Metalworking Fluid Through a Latex Glove Under Field Use Conditions
Whole glove testing for a metalworking fluid (MWF) in the field was performed for the first time. Green latex gloves used in a machine shop were exposed for 20 min to MWF. The permeated amount (1.0 +/- 0.5 microg/cm(2)) was higher than the threshold (0.25 microg/cm(2)) for the ASTM F739-99a closed-loop normalized breakthrough time.
متن کاملReassessing The Health Risks Associated With Employee Exposure To Metalworking Fluid Microbes
Metalworking fluids provide an excellent environment for the growth and proliferation of a variety of bacteria and fungi. Historically, the incidence of infectious disease outbreaks at metalworking facilities has been rare. Consequently the primary focus of microbial contamination control efforts has been to prevent fluid biodeterioration. Research conducted over the past decade increasingly su...
متن کاملWaste Reduction in the Metal Finishing Industry
The metal fmishing industry uses over 40 production processes to produce a wide range of metal products. Waste streams generated include wastewater, waste oils, spent solvents, and spent process solutions. Current1,v a wide variety of techniques which minimize waste are available. Cost-effective methods to reduce electroplating wastewater contamination include water conserv&ion and drag-out red...
متن کاملEnhanced Biological Treatment of Spent Metalworking Fluids 1 by Prior Removal of a Polymer
11 12 The biological treatment of spent synthetic metalworking fluid (MWF) has been investigated in many studies, 13 with most reporting the presence of un-degraded components in the residual waste. In this study, we 14 investigated a hybrid approach to waste treatment of spent MWF, involving both physical treatment and 15 microbial degradation. The effect on biological degradation, of the remo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013