In-process prediction of corner wear in drilling operations
نویسندگان
چکیده
The paper presents an in-process prediction of corner wear in drilling operations by means of a polynomial network. The polynomial network is composed of a number of functional nodes and well organized to form an optimal network architecture using an algorithm for synthesis of polynomial networks (ASPNs). Thrust force or torque in drilling operations has been correlated with corner wear in this study. It has been shown that the thrust force is better than the torque as the sensing signal for the in-process prediction of corner wear. Experimental results have shown that the corner wear over a wide range of drilling conditions can be predicted with a reasonable accuracy if the cutting speed, feed rate, drill diameter, and thrust force are given. # 2000 Published by Elsevier Science S.A. All rights reserved.
منابع مشابه
DRILL WEAR PREDICTION SYSTEM USING OF MOTOR CURRENT AND FUZZY LOGIC METHOD
In automation flexible manufacturing systems, tool wear detection during the cutting process is one of the most important considerations. This study presents an intelligent system for online tool condition monitoring in drilling process .In this paper, analytical and empirical models have been used to predict the thrust and cutting forces on the lip and chisel edges of a new drill. Also an empi...
متن کاملInvestigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE)
This paper reviews existing studies and investigates thermal operational regimes of diamond bit during drilling operations. The operating temperature of the diamond core drill is studied under bench condition and an optimal thermal range are presented. Based on this study, it was noted that glazing of diamond tools is observed at temperatures less than 327°C, and normal wear of diamond tools is...
متن کاملPrediction of Temperature Profile in Oil Wells
A mathematical model has been developed to predict the temperature distribution in wellbores either offshore or inshore. It is incorporated the different activities encountered during drilling operations. Furthermore, the effect of drill collar and casings and bit rotating in a well during completion has been considered. The two dimensional approach is presented in the form of a computer progra...
متن کاملManaged Pressure Drilling Using Integrated Process Control
Control of wellbore pressure during drilling operations has always been important in the oil industry as this can prevent the possibility of well blowout. The present research employs a combination of automatic process control and statistical process control for the first time for the identification, monitoring, and control of both random and special causes in drilling operations. To this end, ...
متن کاملMulti-objective Pareto optimization of bone drilling process using NSGA II algorithm
Bone drilling process is one the most common processes in orthopedic surgeries and bone breakages treatment. It is also very frequent in dentistry and bone sampling operations. Bone is a complex material and the machining process itself is sensitive so bone drilling is one of the most important, common and sensitive processes in Biomedical Engineering field. Orthopedic surgeries can be improved...
متن کامل