Structure and Vibration Analysis of Solenoid Pump for Two-way Hydraulic Control
نویسنده
چکیده
A solenoid pump is a reciprocating piston pump that moves linearly by the aid of a piston cylinder attached at the linear motor axis which carries out a reciprocating motion. Generally, a solenoid pump is a pump utilizing a magnetic plunger of magnetic substance and an electric induction coil. A solenoid pump model for the hydraulic pressure that can control bi-directionally and can generate a high pressure is proposed in this study. The design parameters for the parts of the solenoid pump used for hydraulic pressure are studied using a numerical analysis method. After selecting an adequate solenoid model, the magnetic force and magnetic density on the model are estimated by electromagnetic force analysis. Based on the obtained magnetic force and magnetic density, a structural analysis of the model is performed. Also, design parameters are obtained for the robust design by vibration mode analysis to avoid resonance effect on the key parts of the system. The results of the vibration mode analysis and FFT analysis are proposed in the design of new products.
منابع مشابه
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...
متن کاملEffect of Intake Maintenance on Pump Reliability and Performance
The trend toward higher speed, higher power density liquid turbomachinery has inevitably increased the potential for fluid/structure interaction problems, and the severity of those problems. Fluid structure interaction phenomena can lead to increased wear and to structure failure. There are many factors affecting hydraulic and dynamic performance of pumping plants. These factors contribute to d...
متن کاملMarcin Stefan Cwiklinski Impedance Control of a Hydraulic Servomechanism
A position-based impedance controller is proposed and demonstrated on an existing hydraulic press with a two-way vertically mounted hydraulic cylinder driven by a servo-solenoid valve. A proportional-integral-derivative (PID) controller and a Fuzzy Logic Controller (FLC) are primarily developed to meet the accurate positioning requirements of the impedance control formulation. The impedance fil...
متن کاملSimultaneous Injection Effective Mixing Flow Analysis (SIEMA): Its Development and Application
The development and application of a new simultaneous injectioneffective mixing flow analysis (SIEMA) is described. The manifold is based on one syringe pump with a two-way solenoid valve, a set of holding coils and three-way solenoid valves, two multiport connectors, a mixing coil and a detector. The system is compact and is controlled by a laptop computer. Some analytical features of SIEMA ar...
متن کاملSimulation of flow and Hydraulic of bottom in take structure using the flow3D software
Bottom intake is an intake structure which can be considered as an alternative for regular intakes in mountain streams Water in in taking from river are very vast and complicated issues, each project has special characteristics which should be considered. Water intake from riveris generally based on Pump and gravity method. The gravity method is more useful and common because of continuity and ...
متن کامل