Continuous-time anti-windup generalized predictive control of non-minimum phase processes with input constraints
نویسندگان
چکیده
This paper deals with a design problem of a continuous-time anti-windup generalized predictive control system using coprime factorization approach for nonminimum phase processes with input constraints. Based on the proposed design scheme, a condition for stability of the closed-loop system with input constraints and a straightforward method t.o improve the output response of the system with input constraints are given. Simulation results are presented to support the theoretical analysis.
منابع مشابه
Fault-Tolerant Control of a Nonlinear Process with Input Constraints
A Fault-Tolerant Control (FTC) methodology has been presented for nonlinear processes being imposed by control input constraints. The proposed methodology uses a combination of Feedback Linearization and Model Predictive Control (FLMPC) schemes. The resulting constraints in the transformed process will be dependent on the actual evolving states, making their incorporation in the de...
متن کاملThe Explicit Solution of Model Predictive Control via Multiparametric Quadratic Programming
Control based on on-line optimization, popularly known as model predictive control (MPC), has long been recognized as the winning alternative for constrained sys t ems . The main limitation of MPC is, however, its on-line computat ional complexity. For discrete-time linear time-invariant systems with constraints on inputs and states, we develop an algorithm to determine explicitly the state fee...
متن کاملCOMPARISON BETWEEN MINIMUM AND NEAR MINIMUM TIME OPTIMAL CONTROL OF A FLEXIBLE SLEWING SPACECRAFT
In this paper, a minimum and near-minimum time optimal control laws are developed and compared for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The control commands are considered as typical bang-bang with multiple symmetrical switches, the time optimal control solution for the rigid-body mode is obtained as a bang-bang function and app...
متن کاملSystematic Anti-windup Compensator Design for Multivariable Systems
The aim of anti-windup compensation is to modify the dynamics of a control loop when control signals saturate, so that a good transient behaviour is attained after desaturation, while avoiding nonlinear oscillations and repeated saturations. Model-based anti-windup compensation is here considered for multiple-input multiple-output (MIMO) systems. A modiied controller structure is proposed, whic...
متن کاملRobust Anti-Windup Control Design for PID Controllers–Theory and Experimental Verification
This paper addresses an approximation-based anti-windup (AW) control strategy for suppressing the windup effect caused by actuator saturation nonlinearity in proportional–integral–derivative (PID) controlled systems. The effect of actuator constraint is firstly regarded as a disturbance imported to the PID controller. The external disturbance can then be modeled by a linear differential equatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010