CdTe nBn photodetectors with ZnTe barrier layer grown on InSb substrates

نویسندگان

  • Zhao-Yu He
  • Calli M. Campbell
  • Maxwell B. Lassise
  • Zhi-Yuan Lin
  • Jacob J. Becker
  • Yuan Zhao
  • Mathieu Boccard
  • Zachary Holman
  • Yong-Hang Zhang
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

AFRL-OSR-VA-TR-2014-0375 Novel Substrates for Photodetectors

This research has investigated epitaxial InSb, CdTe, MgCdTe, and CdTe/MgCdTe double heterostructures grown on InSb (100) substrates using molecular beam epitaxy. State-ofthe-art materials quality has been successfully achieved in all of these materials, which have demonstrated record narrow X-ray diffraction line-widths, ultra-low defect density, and record long minority carrier lifetime of ove...

متن کامل

Impressive Reduction of Dark Current in InSb Infrared Photodetector to achieve High Temperature Performance

Infrared photo detectors have vast and promising applications in military,industrial and other fields. In this paper, we present a method for improving theperformance of an infrared photodetector based on an InSb substance. To achieve goodperformance at high temperatures, thermal noise and intrusive currents should bereduced. For this purpose, a five-layer hetero structu...

متن کامل

Properties of the CdTe/InSb interface studied by optical and surface analytical techniques

CdTe is an important material for radiation detectors and photovoltaic (PV) solar cells [1], with various active research activities in recent two decades [1–18]. CdTe/InSb is a significant system because of the very close lattice mismatch (∆a/a ~ 5 × 10) between them [6, 18], and therefore, the dissimilar heteroepitaxy between II–VI and III–V compounds, such as CdTe on InSb or InSb on CdTe, is...

متن کامل

Analysis of Cu Diffusion in ZnTe-Based Contacts for Thin-Film CdS/CdTe Solar Cells

Ohmic contacts to thin-film CdS/CdTe photovoltaic devices have been formed using a two-layer contact interface of undoped ZnTe (ZnTe) and Cu-doped ZnTe (ZnTe:Cu), followed by Ni or Ti as an outer metallization. Secondary ion mass spectroscopy (SIMS) is used to study Cu diffusion within this back-contact structure, and also, to monitor Cu diffusion from the contact into the CdTe. When Ni metalli...

متن کامل

Type-II CdSe/CdTe/ZnTe (core-shell-shell) quantum dots with cascade band edges: the separation of electron (at CdSe) and hole (at ZnTe) by the CdTe layer.

The rational design and synthesis of CdSe/CdTe/ZnTe (core-shell-shell) type-II quantum dots are reported. Their photophysical properties are investigated via the interband CdSe-->ZnTe emission and its associated relaxation dynamics. In comparison to the strong CdSe (core only) emission (lambda(max) approximately 550 nm, Phi(f) approximately 0.28), a moderate CdSe-->CdTe emission (lambda(max) ap...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016