Synthesis of Novel Ether Thionocarbamates and Study on Their Flotation Performance for Chalcopyrite

نویسندگان

  • Gang Zhao
  • Jing Peng
  • Hong Zhong
  • Shuai Wang
  • Guangyi Liu
  • Kostas A. Matis
چکیده

Abstract: Novel ether thionocarbamates, O-butoxy isopropyl-N-ethoxycarbonyl thionocarbamate (BIPECTC) and O-(2-butoxy-1-methylethoxy) isopropyl-N-ethoxycarbonyl thionocarbamate (BMIPECTC), were synthesized in this study. Their collecting efficiencies in the flotation of chalcopyrite were investigated using flotation tests, adsorption measurements, ultraviolet spectra (UV) and Fourier transform-infrared spectroscopy (FT-IR) and density functional theory (DFT) calculations. The synthesized ether thionocarbamates showed better frothing properties than methyl-isobutyl-carbinol (MIBC) and stronger affinity to chalcopyrite compared with O-isopropyl-N-ethyl thionocarbamate (IPETC) and O-isobutyl-N-ethoxycarbonyl thionocarbamate (IBECTC). UV spectra analysis showed that the ether thionocarbamates react with Cu2+, with the exception of Fe2+, Ni2+, Zn2+ and Pb2+. Additionally, it was further confirmed by FTIR spectra that a chemical reaction occurs between copper ion and BIPECTC and BMIPECTC. The adsorption capacity measurements revealed that chalcopyrite exhibits good adsorption ability for ether thionocarbamates at an approximate pH of 8–10, which agrees with the flotation tests. The quantum chemistry calculation results indicated that the ether thionocarbamates exhibit stronger collecting ability for copper mineral in terms of frontier molecular orbital analysis, binding model simulation with copper ions and the molecular hydrophobicity compared with IPETC and IBECTC. The computational results are in very good agreement with the experimental results.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of Flotation Parameters for Copper Recovery from Enargite and Chalcopyrite Mixed Ore

A flotation pre-treatment study for the separation of enargite (Cu3AsS4) from chalcopyrite (CuFeS2) ores of different origins was investigated in this work. The copper ore bearing enargite mineral contained 5.87mass% As and 16.50mass% Cu while the chalcopyrite bearing ore contained 0.32mass% As and 21.63mass% Cu. The two ore samples were mixed at 7 : 3 (enargite : chalcopyrite) by weight ratio ...

متن کامل

Effect of Ultrasonic Pre-Treatment and Aeration on Flotation Separation of Chalcopyrite from Pyrite

In this paper, the effect of ultrasonic pre-treatment and aeration on the flotation separation of chalcopyrite from pyrite was investigated at different amounts of potassium ethyl xanthate (KEX), as a collector, and pH values. Artificially-mixed samples of chalcopyrite and pyrite were subjected to flotation studies to understand the effect of aeration with or without ultrasonic tre...

متن کامل

Evaluation, modelling and simulation of the MIM flotation circuit to increase revenue

The recovery and concentrate grade, used simultaneously, are the most widely accepted measures of assessing metallurgical performance. Meanwhile, new challenges are being found with more complex ores around the world, a new methodology to evaluate flotation circuits more accurately is used to keep the Mineral Industry afloat in a changing world by increasing revenues. The flotation process is d...

متن کامل

A Laboratory Study of Removing Arsenic from a Synthetic Copper Concentrate

Arsenic is the 20th most abundant element in the earth's crust at a level of about 2 ppm. It is a constituent of over 300 minerals and is commonly found in non-ferrous ores such as copper, lead, zinc, gold and uranium. Efficient separation of arsenic minerals from other sulphide minerals is of great importance for the metallurgical performance of flotation processes. This work was undertaken to...

متن کامل

CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor

A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MAT...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016