Applying Efficient Computation of the Mass Matrix for Decoupling Control of Complex Parallel Manipulators
نویسندگان
چکیده
Most challenging aspects in the control of complex parallel mechanisms or robotic manipulators is how to deal with the high system nonlinearity and with the coupled dynamics. These aspects can be satisfied by integrating the pose dependent inertia or mass matrix into the control scheme. To satisfy the requirements of real-time application, this paper presents a high efficient method to compute the mass matrix of arbitrarily complex parallel manipulators. Model simplification become dispensable, which leads necessarily to the improvement of control accuracy. Copyright c ©2005 IFAC
منابع مشابه
Near-Minimum-Time Motion Planning of Manipulators along Specified Path
The large amount of computation necessary for obtaining time optimal solution for moving a manipulator on specified path has made it impossible to introduce an on line time optimal control algorithm. Most of this computational burden is due to calculation of switching points. In this paper a learning algorithm is proposed for finding the switching points. The method, which can be used for both ...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کامل3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملFast Finite Element Method Using Multi-Step Mesh Process
This paper introduces a new method for accelerating current sluggish FEM and improving memory demand in FEM problems with high node resolution or bulky structures. Like most of the numerical methods, FEM results to a matrix equation which normally has huge dimension. Breaking the main matrix equation into several smaller size matrices, the solving procedure can be accelerated. For implementing ...
متن کاملThe Isotropic Decoupling of the Direct Kinematics of Parallel Manipulators under Sensor Redundancy
Using redundant sensors, the direct kinematics of general parallel manipulators is here d e coupled a n d r e-duced to an orientation problem only. The accuracy of the decoupling depends on the condition number of a decoupling matrix. The conditions under which this matrix is isotropic are derived and illustrated with a numerical example.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005