Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study
نویسندگان
چکیده
G. Pileičikienė*, A. Šurna**, G. Skirbutis***, R. Barauskas****, R. Šurna***** *Kaunas University of Medicine, Sukilėlių 51, 50106 Kaunas, Lithuania, E-mail [email protected] **Kaunas University of Medicine, Sukilėlių 51, 50106 Kaunas, Lithuania, E-mail: [email protected] ***Kaunas University of Medicine, Sukilėlių 51, 50106 Kaunas, Lithuania, E-mail: [email protected] ****Kaunas University of Technology, Studentų 50, 51368 Kaunas, Lithuania, E-mail: [email protected] *****Kaunas University of Technology, Studentų 50, 51368 Kaunas, Lithuania, E-mail: [email protected]
منابع مشابه
Meshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملDynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis
As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...
متن کاملGeometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملThree-dimensional biomechanical study of functional stresses in composite restorations of masticatory teeth.
OBJECTIVE The aim of the present work was to study and evaluate the intensity of stresses in the adhesive bond in composite restorations of masticatory teeth after light-curing, under temperature changes and masticatory loads. MATERIALS AND METHODS Data for the 3D model generation of a maxillary premolar were obtained during a routine CT head scan. Thirty-three cross-sections of tooth 25 were...
متن کامل