Effects on the Qualities of Proteolysis to Beef by Non-coating and Coating Protease Treatment

نویسندگان

  • Kwang-Il Kim
  • Sang-Yoon Lee
  • Soo-Jin Kim
  • Jae-Hee Seo
  • Joong-Kyu Lee
  • Jung-Kue Shin
  • Hyung-Yong Cho
  • Mi-Jung Choi
چکیده

This study was performed to improve the techniques used for tenderizing red meat as elderly food. Beef meat was immersed in liposome encapsulated enzyme solution and the effect of protease encapsulation on the beef properties was analyzed. The protease encapsulation properties were analyzed according to the size distribution and enzymatic activity. After enzyme reaction on the beef, the chemical properties of the meat such as pH, water holding capacity, shear rate, lipid oxidation and total volatile basic nitrogen (TVB-N) were analyzed. The pH of the beef increased during the reaction and coating protease (CP) was higher than non-coating protease (NCP). Total color differences were increased remarkably after 36 h and generally, the difference in CP was relatively lower than in NCP. WHC was significantly decreased within 24 h, and no effect from the protease coating was observed. Protease activity was significantly increased within 48 h and no differences in the enzyme coating were observed. The TVB-N value of NCP was increased within 24 h while CP was sustained for up to 36 h. The TVB-N value of protease treated meat increased after 36 h and no effect from the protease coating was detected. Consequently, liposome encapsulated protease was found to have similar properties as non-coated protease. Application of liposome seems to be an interesting option for injecting various functional materials without changing the properties of meat.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preservative effects of sumac hydro-alcoholic extract and chitosan coating enriched along with Zataria multiflora Boiss essential oil on the quality of beef during storage

Beef is susceptible to rapid spoilage due to its high amount of protein (18.00%) and moisture (72.00%). Food industries have recently found methods to extend beef shelf-life. The influence of beef dipping in hydro-alcoholic extract of sumac (SE) and chitosan (CH) coating incorporated with Zataria multiflora essential oil (ZEO) on microbial, chemical and sensory quality of beef was eval...

متن کامل

Inhibitory Effect of Nano-gel/Emulsion of Chitosan Coating Incorporated with Ziziphora Clinopodioides Essential Oil and Nisin on Escherichia Coli O157:H7 Inoculated in Beef at Cold Storage Condition

Introduction: This study was conducted to evaluate the influence of chitosan Nano-gel/emulsion coating functionalized by Ziziphora clinopodioides essential oil (ZCEO) and nisin on growth inhibition of Escherichia coli O157: H7 inoculated in beef samples during 16 days in cold storage condition (4˚C). Methods: Beef sample ...

متن کامل

A Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel

Despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. In this research electroless Ni-B-Tl coating was used with the aim to increase their surface hardness. The effects of Nickel chloride, Sodium borohydride, Thallium nitrate and Ethylendiamin on the chemical composition of coating were studied. To achieve an increase in hardness, the effects of ...

متن کامل

Evaluation of Heat Treatments and Their Effects on the Corrosion Behavior of TiAlON Coatings Prepared by Cathodic Arc Evaporation on D3 Tool Steel

A series of TiAlON coatings were synthesized in a gaseous mixture of argon, nitrogen and oxygen by cathodic arc evaporation method using a Ti–Al mosaic target. Oxidation of coatings was carried out by heating the coated samples at the temperatures of 500, 600, 700, and 800°C for 1 h in air atmosphere. It was found that heat treatment changed the microstructure and composition of the coating. Th...

متن کامل

STUDY ON NIOBIUM CARBIDE COATING FORMATION ON AISI L2 STEEL USING THERMO-REACTIVE DEPOSITION METHOD

In the present research, to form niobium carbide coating on the surface of AISI L2 steel Thermo-Reactive Deposition method (TRD) in a molten bath was used. Niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4, and 8 hours. The molten bath contained 20wt.% borax (Na2B4O7), 5 wt.% boric acid (B2O3), and 75 wt.% ferro-niobium. The presence and properties of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 36  شماره 

صفحات  -

تاریخ انتشار 2016