Thermal shock properties of chemically toughened borosilicate glass

نویسنده

  • E. D. Zanotto
چکیده

This paper describes an experimental test of the uni®ed theory of thermal shock. A borosilicate glass (78.1%SiO2± 13.3%B2O3±4.7%Na2O±3.4%Al2O3) subjected to ion-exchange in molten KNO3, was used. The theory predicts the critical temperature di€erence for fracture initiation by thermal shock; however, it overestimates the number of cracks which propagate simultaneously. Despite that fact, taken into account the numerous assumptions of the theoretical model and the possible experimental errors, our results indicate a fair agreement between theory and experiment. Ó 1999 Elsevier Science B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Doctor blade sol-gel deposition of a nano-composite copper-zinc oxide on borosilicate glass for advanced oxidative degradation of textille dye in water environment

Nano-composite copper-zinc oxide (NCCZO) was deposited on borosilicate glass using a novel sol-gel/doctor-blade technique. The photocatalyst was prepared from copper acetylacetonate, zinc acetylacetonate, monoethanolamine (MEA) and citric acid monohydrate at 75 oC, aged for 1 d and annealed at 650 oC. The properties of the NCCZO nano-composite were investigated by X-ray diffraction (XRD) and fi...

متن کامل

Surface Reactivity Control of a Borosilicate Glass Using Thermal Poling

The ability to control glass surface reactivity at different length enables key properties required for future “smart substrates”. Employing a thermal poling process on a specific borosilicate glass composition can yield a surface with tailored physical and chemical properties. This work shows that during poling, alkali contained in the glass matrix migrates from the anode to the cathode side o...

متن کامل

Effect of Lcp Addition on the Properties of Hybrid Composites

A hybrid composite consisting of rubber toughened nylon 6,6, glass fiber and LCP was investigated by varying LCP content. The hybrid system exhibited better processability than the glass fiber reinforced composite. A decrease in the total torque was observed with the LCP content indicating the reduction in the energy consumed during the processing of the hybrid composites. Thermal stability of ...

متن کامل

Rheology–morphology relationships in nylon–LCP hybrid composites

Rheological behaviors of hybrid composite systems consisting of liquid crystalline polymer (LCP), short glass fibers and toughened nylon 66 were characterized with capillary rheometry. The results were compared with the rheological behavior of untoughened nylon/ glass fiber/LCP hybrid composites to establish the role of elastomers and glass fibers on LCP fibrillation. Results showed that, compa...

متن کامل

THE EFFECT OF COMPLEX NUCLEATING AGENT ON THE PHYSICAL AND CHEMICAL PROPERTIES OF Li2O-Al2O3-SiO2 GLASS CERAMIC

Abstract: In the present work, effect of the nucleating agent such as TiO2, ZrO2, P2O5, Ye2O3 and CeO2 in single, double, triple and fourth systems on the crystallization behavior of various compositions was studied. Using differential thermal analysis (DTA), the composition of Li2O-Al2O3-SiO2 (LAS) was optimized and the coefficient of thermal expansion (CTE), three point flexural strength, har...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999