Nondestructive Evaluation of Carbon Fiber Reinforced Polymer Composites Using Reflective Terahertz Imaging
نویسندگان
چکیده
Terahertz (THz) time-domain spectroscopy (TDS) imaging is considered a nondestructive evaluation method for composite materials used for examining various defects of carbon fiber reinforced polymer (CFRP) composites and fire-retardant coatings in the reflective imaging modality. We demonstrate that hidden defects simulated by Teflon artificial inserts are imaged clearly in the perpendicular polarization mode. The THz TDS technique is also used to measure the thickness of thin fire-retardant coatings on CFRP composites with a typical accuracy of about 10 micrometers. In addition, coating debonding is successfully imaged based on the time-delay difference of the time-domain waveforms between closely adhered and debonded sample locations.
منابع مشابه
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملInorganic Polymer Matrix Composite Strength Related to Interface Condition
Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through th...
متن کاملHigh-speed terahertz reflection three-dimensional imaging for nondestructive evaluation.
We demonstrate high-speed terahertz (THz) reflection three-dimensional (3D) imaging based on electronically controlled optical sampling (ECOPS). ECOPS enables scanning of an axial range of 9 mm in free space at 1 kHz. It takes 80 s to scan a transverse range of 100 mm × 100 mm along a zigzag trajectory that consists of 200 lines using translation stages. To show applicability of the imaging sys...
متن کاملCreep and Dynamic Mechanical Behavior of Natural Fiber/Functionalized Carbon Nanotubes Modified Epoxy Composites
The creep and dynamic mechanical behavior of natural fiber/epoxy composites using functionalized multiwalled carbon nanotubes (MWCNTs) modified matrix were investigated. 0.4 wt% of MWCNTs functionalized with carboxylic acid groups (MWCNTs-COOH) were dispersed in epoxy and three-phase multiscale hybrid composites were processed by hot press. Natural fiber/epoxy two-phase composites without MWCNT...
متن کامل