Development of a Stair-Step Multifrequency Synchronized Excitation Signal for Fast Bioimpedance Spectroscopy
نویسندگان
چکیده
Wideband excitation signal with finite prominent harmonic components is desirable for fast bioimpedance spectroscopy (BIS) measurements. This work introduces a simple method to synthesize and realize a type of periodical stair-step multifrequency synchronized (MFS) signal. The Fourier series analysis shows that the p-order MFS signal f(p, t) has constant 81.06% energy distributed equally on its p 2(n)th primary harmonics. The synthesis principle is described firstly and then two examples of the 4-order and 5-order MFS signals, f(4, t) and f(5, t), are synthesized. The method to implement the MFS waveform based on a field-programmable gate array (FPGA) and a digital to analog converter (DAC) is also presented. Both the number and the frequencies of the expected primary harmonics can be adjusted as needed. An impedance measurement experiment on a RC three-element equivalent model is performed, and results show acceptable precision, which validates the feasibility of the MFS excitation.
منابع مشابه
Comparative Analysis of Multisine and Binary Excitation Signals for Human Body Analysis
Bioimpedance analysis (BIA) is a potential field and clinical method for evaluating fat percentage and body mass. Multi-frequency bioimpedance monitoring methodology used for the analysis purpose is a widely used method to estimate body composition. The multifrequency bioimpedance analysis using network analyzer is a relatively quick, simple and non-invasive technique to measure body compositio...
متن کاملبررسی تجربی فتوتحریک سه مرحلهای اتم گادالینیم Gd با روش اپتوگالوانیک
Optogalavanic technique has been used widely in laser spectroscopy. In this paper we have presented the results of an experimental three- step photo- excitation of Gd atom, using optogalvanic technique. Three tunable dye laser pulses were applied to excite the Gd atom in a three-step photo – excitation process. The optogalvanic signal was used to monitor the laser wavelength and efficiency of...
متن کاملMultifrequency simultaneous bioimpedance measurements using multitone burst signals for dynamic tissue characterization. B.Sanchez and R.Bragos
In this paper we present the keypoints to perform multifrequency simultaneous bioimpedance measurements using multitone signals. Concerning the frequency distribution, tones are spread over 1kHz to 1MHz range using a custom frequency distribution which we called Bilateral Quasi Logarithmic (BQL). BQL concentrates a higher number of tones around the impedance relaxation and contains a frequency ...
متن کاملAssessment of tooth structure using an alternative electrical bioimpedance spectroscopy method.
In the past few years bioimpedance has been used in many applications in dentistry, such as estimating the length of root canals and the physical properties of enamel. Despite the significant number of studies using bioimpedance to investigate the dental structure, many of them use only the real component of bioimpedance, i.e., the resistance, disregarding the information provided by the imagin...
متن کاملIntra-abdominal fat: Comparison of computed tomography fat segmentation and bioimpedance spectroscopy
BACKGROUND Intra-abdominal fat is an important factor in determining the metabolic syndrome/insulin resistance, and thus the risk of diabetes and ischaemic heart disease. Computed Tomography (CT) fat segmentation represents a defined method of quantifying intra-abdominal fat, with attendant radiation risks. Bioimpedance spectroscopy may offer a method of assessment without any risks to the pati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 2014 شماره
صفحات -
تاریخ انتشار 2014