Cost-Effectiveness of Five Commonly Used Prosthesis Brands for Total Knee Replacement in the UK: A Study Using the NJR Dataset.
نویسندگان
چکیده
BACKGROUND There is a lack of evidence on the effectiveness or cost-effectiveness of alternative brands of prosthesis for total knee replacement (TKR). We compared patient-reported outcomes, revision rates, and costs, and estimated the relative cost-effectiveness of five frequently used cemented brands of unconstrained prostheses with fixed bearings (PFC Sigma, AGC Biomet, Nexgen, Genesis 2, and Triathlon). METHODS We used data from three national databases for patients who had a TKR between 2003 and 2012, to estimate the effect of prosthesis brand on post-operative quality of life (QOL) (EQ-5D-3L) in 53 126 patients at six months. We compared TKR revision rates by brand over 10 years for 239 945 patients. We used a fully probabilistic Markov model to estimate lifetime costs and quality-adjusted life years (QALYs), incremental cost effectiveness ratios (ICERs), and the probability that each prosthesis brand is the most cost effective at alternative thresholds of willingness-to-pay for a QALY gain. FINDINGS Revision rates were lowest with the Nexgen and PFC Sigma (2.5% after 10 years in 70-year-old women). Average lifetime costs were lowest with the AGC Biomet (£9 538); mean post-operative QOL was highest with the Nexgen, which was the most cost-effective brand across all patient subgroups. For example, for 70-year-old men and women, the ICERs for the Nexgen compared to the AGC Biomet were £2 300 per QALY. At realistic cost per QALY thresholds (£10 000 to £30 000), the probabilities that the Nexgen is the most cost-effective brand are about 98%. These results were robust to alternative modelling assumptions. CONCLUSIONS AGC Biomet prostheses are the least costly cemented unconstrained fixed brand for TKR but Nexgen prostheses lead to improved patient outcomes, at low additional cost. These results suggest that Nexgen should be considered as a first choice prosthesis for patients with osteoarthritis who require a TKR.
منابع مشابه
Has Metal-On-Metal Resurfacing Been a Cost-Effective Intervention for Health Care Providers?—A Registry Based Study
BACKGROUND Total hip replacement for end stage arthritis of the hip is currently the most common elective surgical procedure. In 2007 about 7.5% of UK implants were metal-on-metal joint resurfacing (MoM RS) procedures. Due to poor revision performance and concerns about metal debris, the use of RS had declined by 2012 to about a 1% share of UK hip procedures. This study estimated the lifetime c...
متن کاملRevision Rates after Primary Hip and Knee
Funding: Jan van der Meulen was supported by a National Public Health Career Scientist Award, Department of Health – NHS R&D, UK. The NJR is funded through a levy raised on the sale of hip and knee replacement implants. The cost of the levy is set by the NJR Steering Committee, an advisory nondepartmental public body that oversees the NJR’s work programme and progress. The NJR Steering Committe...
متن کاملQuality measures for total ankle replacement, 30-day readmission and reoperation rates within 1 year of surgery: a data linkage study using the NJR data set
OBJECTIVE To report on the rate of 30-day readmission and the rate of additional or revision surgery within 12 months following total ankle replacement (TAR). DESIGN A data-linkage study of the UK National Joint Registry (NJR) data and Hospital Episodes Statistics (HES) database. These two databases were linked in a deterministic fashion. HES episodes 12 months following the index procedure w...
متن کاملInvestigation of Wear Behavior of Biopolymers for Total Knee Replacements Through Invitro Experimentation
The average life span of knee prosthesis used in Total Knee Replacement (TKR) is approximately 10 to 15 years. Literature indicates that the reasons for implant failures include wear, infection, instability, and stiffness. However, the majority of failures are due to wear and tear of the prosthesis. The most common biopolymer used in TKR is Ultra High Molecular Weight Polyethylene (UHMWPE). Pr...
متن کاملHealth Technology Assessment of CAD/CAM in Dentistry
Introduction: Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) are the latest achievements of Prosthodontics and Restorative Dentistry. The aim of this research is to help make appropriate decision whether to use this technology in Iran. Methods: Studies were included in this review that compared Dental CAD/CAM with conventional restorativ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- PloS one
دوره 11 3 شماره
صفحات -
تاریخ انتشار 2016