Low Power High Speed SQRT Carry Select Adder
نویسندگان
چکیده
Design of high speed and low power data path logic systems are one of the most challenging areas of research in VLSI system design. Adder circuit is the main building block in DSP processor. However, Digital adders suffer with the problem of carry propagation delay. To alleviate this problem Carry Select Adder (CSLA) are used in computational unit. Carry Select Adder one of the fastest adder among other. There is scope to reduce the power consumption in the regular CSLA. A simple gate level modification is required of the regular CSLA to reduce the power. This paper proposes modified 40-bit square-root CSLA (SQRT CSLA) architecture. Both the regular and modified 40-bit CSLA are designed with TSMC 0.13-μm CMOS process technology and results are compared with TSMC 0.18-μm CMOS process technology. The proposed design has reduced area and power as compared with the regular SQRT CSLA withy slight increase in the delay. The result analysis shows that proposed CSLA has better performance than conventional CSLA.
منابع مشابه
Area-delay Efficient Implementation of Sqrt-csla
Design of area, high speed and power-efficient data path logic systems forms the largest areas of research in VLSI system design. The addition speed is limited by the time necessary to transmit a carry through the adder. Carry Select Adder (CSLA) is one of the fastest adders used in several data processing processors to perform fast arithmetic purpose. From the configuration of the CSLA, it is ...
متن کاملDesign of Digital Filter using Low Power and Area Efficient SQRT CSLA
The demand of delivering faster, portable and highly reliable products is the major goal of low power VLSI subsystems and it cannot be maintained in all the situations. But it can be optimized to a certain extent by controlling some of the factors. Design of area and power efficient high speed data path logic systems are one of the substantial researches and the most crucial parameter that requ...
متن کاملEnergy and Area efficient Carry Select Adder on a reconfigurable hardware
Carry Select Adder (CSLA) is one of the high speed adders used in many computational systems to perform fast arithmetic operations. From the structure of the CSLA, it is clear that there is scope for reducing the gate count and power consumption in the CSLA. This work uses a simple and efficient gate-level modification to significantly reduce the logic resources and power of the CSLA. Based on ...
متن کاملLow power and reduced area Carry Select Adder
Power dissipation is one of the most important design objectives in integrated circuits, after speed. As adders are the most widely used components in such circuits, design of efficient adder is of much concern for researchers.From the structure of the CSLA, it is clear that there is scope for reducing the area and power consumption in the CSLA. This work uses a fewer transistors to significant...
متن کاملLow Power, Area and Delay Efficient Carry Select Adder Using Bec-1 Converter
In performing fast arithmetic functions, Carry select adder (CSLA) is one of used in many data processing processors to perform fast arithmetic functions. Adders are the basic building blocks in digital integrated circuit based designs. Ripple carry adders are slowest adders as every full adder must wait till the carry is generated from previous full adder. CSLA (SQRT CSLA) architecture have be...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012