DNA Sensors with Diamond as a Promising Alternative Transducer Material
نویسندگان
چکیده
Bio-electronics is a scientific field coupling the achievements in biology with electronics to obtain higher sensitivity, specificity and speed. Biosensors have played a pivotal role, and many have become established in the clinical and scientific world. They need to be sensitive, specific, fast and cheap. Electrochemical biosensors are most frequently cited in literature, often in the context of DNA sensing and mutation analysis. However, many popular electrochemical transduction materials, such as silicon, are susceptible to hydrolysis, leading to loss of bioreceptor molecules from the surface. Hence, increased attention has been shifted towards diamond, which surpasses silicon on many levels.
منابع مشابه
High-temperature stable indium oxide photonic crystals: transducer material for optical and resistive gas sensing
Indium oxide (In2O3) inverse opal is a promising new transducer material for resistive and optical gas sensors. The periodically ordered and highly accessible pores of the inverse opal allow the design of resistive sensors with characteristics independent of structure limitations, such as diffusion effects or limited conductivity due to constricted crosslinking. Additionally the photonic proper...
متن کاملModification of mesoporous silica SBA-15 with different organic molecules to gain chemical sensors: a review
The recognition of the biologically and environmentally important ions is of great interest in the field of chemical sensors in recent years. The fluorescent sensors as a powerful optical analytical technique for the detection of low level of various analytes such as anions and metal cations have been progressively developed due to the simplicity, cost effective, and selectivity for monitoring ...
متن کاملاندازهگیری دقیق ولتاژ الکتریکی در مبدل ولتاژ نوری با استفاده از شبکههای عصبی
This paper introduces Artificial Neural Network (ANN) method for measuring voltage in the Optical Voltage Transducer (OVT) using one or more electric field sensors. In order to obtain an accurate voltage measurement with minimum number of sensors, first the locations of sensors are specified by quadrature method. Then the electric field intensity at these locations is provided to ANN for the ca...
متن کاملThe PLT: A Luminosity Monitor for CMS Based on Single-Crystal Diamond Pixel Sensors
The Pixel Luminosity Telescope (PLT) system is an innovative luminosity monitor being developed as an early upgrade for the CMS detector at the LHC. An essential feature of the PLT is the use of single crystal diamond, grown by chemical vapor deposition, as the active sensor material. The radiation hardness of diamond, along with its lack of need for active cooling, are key to the design and fu...
متن کاملWeight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 9 شماره
صفحات -
تاریخ انتشار 2009