Design of Symmetrical High - Frequency Coaxial Wound Transformer for Multiport Converters

نویسندگان

  • Gierri Waltrich
  • Jorge L. Duarte
  • Marcel A.M. Hendrix
چکیده

A bi-directional multi-port converter can accommodate various energy storages and sources. Therefore, a multiport converter will be a good candidate for application as a future universal converter for (hybrid) electrical vehicles or local distribution systems. The main design challenge of the multiport converter analyzed in this paper is the design of its three-phase symmetrical transformer. In this converter symmetry of the leakage inductances is essential to ensure balanced three-phase currents (transferred power). These currents are interconnected by three-phase bridges which are linked together by a threephase, three-port, transformer. To realize the equality of the leakage inductances a specific transformer design is necessary. Since conventionally wound three-phase transformer core shapes suitable for high-frequency are expensive and difficult to build, a coaxial wound transformer will be designed in this paper.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Flexible Power Electronic Transformer for Power Flow Control Applications

This paper proposes a Flexible Power Electronic Transformer (FPET) for the application in the micro-grids. The low frequency transformer is usually used at the Point of Common Coupling (PCC) to connect the low voltage grid and utility network to each other. The conventional 50Hz transformer results in enhanced low voltage-grid power management system during grid-connected operation. In this pap...

متن کامل

Efficiency Improvement of the Flyback Converter Based on High Frequency Transformer Winding Rearrangement

In this paper, a novel method for loss reduction and efficiency optimization of the high frequency flyback transformers is proposed based on rearrangement of the windings. According to detailed analysis of the high frequency flyback transformer using FEM technique, a novel and simple approach for its design improvement and loss reduction is introduced. It is shown that leakage flux scattering i...

متن کامل

Modeling and Simulation of Multiple Piezoelectric Transformer Converters

Piezoelectric transformers (PT) are an alternative to wire wound magnetic transformers because of numerous advantages i.e. being the electromechanical energy conversion, low EMI, a compact and low design, as well as a high potential of high efficiency and power density. The last two decades of research into piezoelectric transformer (PT) based power converters have led to some extensive improve...

متن کامل

Wind Turbine Transformer Optimum Design Assuming a 3D Wound Core

A wind turbine transformer (WTT) is designed using a 3D wound core while the transformer’s total owning cost (TOC) and its inrush current performance realized as the two objective functions in a multi-objective optimization process. Multi-objective genetic algorithm is utilized to derive Pareto optimal solutions. The effects of inrush current improvement on other operating and design parameters...

متن کامل

Hybrid Z-Source DC-DC Converter with ZVZCS and Power Transformer Resetting: Design, Modeling, and Fabrication

This paper introduces a novel two transistors forward topology employing a z-source to achieve ZVZCS and power transformer resetting for various applications. Comparing with the forward converter, this topology has the advantage of displaying ZCS condition with an added Z-Source and no additional switches when the switches turn on, and that ZVS condition happens when the switches turn off. Duty...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010