In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification

نویسندگان

  • C. Puncreobutr
  • P. Rockett
چکیده

Real-time in situ synchrotron X-ray tomographic microscopy was used to gain new insights into and quantify the nucleation mechanisms and growth kinetics of b-Al5FeSi intermetallics during solidification of an aluminium Al–7.5Si–3.5Cu–0.6Fe (wt.%) alloy. Three new insights were obtained. First, the plate-like b-intermetallics appeared to nucleate mainly on or near the primary aluminium dendrites and to a lesser extent off the oxide skin on the surface of the specimen. Second, for this alloy composition, b-intermetallic formation was largely complete before the formation of Al–Si eutectic. Third, the b-intermetallics formed via fast lateral growth, wrapping around and in between the primary dendrite arms. Further, the nucleation and growth dynamics of b-intermetallics were quantified as a function of undercooling in a functional form that could be easily used in microstructural simulations. The frequency of intermetallic interaction mechanisms, such as plate nucleation vs. impingement and branching, were also quantified. 2014 Acta Materialia Inc. Published by Elsevier Ltd. This is an open access article under theCCBY license (http://creativecommons.org/

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming

In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...

متن کامل

INFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID METAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING

  Abstract:   The aims of this research were to investigate the effects of semisolid metal (SSM) processing parameters (i.e., shear rates –times – temperatures combinations) on the primary solidification products and isothermal holding duration, subsequent to cessation of stirring on the secondary solidification of Al-Si (A356) alloy.   The dendrite fragmentation was found to be the governing m...

متن کامل

The Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate

In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contr...

متن کامل

بررسی ریزساختار کامپوزیت ریختگی درجا با زمینه آلیاژ آلومینیوم A319 مقاوم شده با ترکیبات بین‌فلزی حاوی آهن، تولید شده به‌روش هم‌زدن در ناحیه نیمه‌جامد

The effect of stir casting process on the modification of the Fe-containing intermetallics formed in a cast in-situ composite based on Al-319 matrix alloy was studied in the present work. Microstructural observations using optical and scanning electron microscopes showed that the undesirable needle-like shape of the Fe-containing intermetallics (β) and also the coarse star-like α com...

متن کامل

MODELING OF RAPID SOLIDIFICATION PROCESS IN THE GAS ATOMIZATION OF MOLTEN METALS

In the present work, a model was proposed to predict the thermal history during rapid solidification (RS) of metal droplets in the gas atomization process. The classical theory of heterogeneous nucleation was based on Newtonian heat flow and enthalpy method. Solving the governing numerical equations by the finite difference method (FDM) gave up the opportunity of analyzing the temperature-time ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014