Compensators for the Buck Converter: Design and Analysis
ثبت نشده
چکیده
This paper discusses the design of a compensator for the buck DC switching converter. Three different compensators are designed and analyzed based on phase and gain margins. Op-amp implementations for each compensator are derived and tested with an example converter. The performance of the converters is examined based on transient response and rejection of steady-state error due to a step change in the input voltage.
منابع مشابه
A Buck-Boost Converter; Design, Analysis and Implementation Suggested for Renewable Energy Systems
This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is...
متن کاملAnalysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملDigital Controller Designbased on Time Domain for DC-DC Buck Converter
In this paper, the digital controller design for compensating the dc-dc buck converter output voltage has been analyzed in the digital domain. The main idea of this paper is patterning the samples of high order ideal controller and using integral square error in determining digital PID coefficients. This approach provides higher precision of digital controller design and eliminates the need for...
متن کاملBidirectional Buck-Boost Integrated Converter for Plug-in Hybrid Electric Vehicles
Background and Objectives: Power electronics infrastructures play an important role in charging different types of electric vehicles (EVs) especially Plug-in Hybrid EVs (PHEVs). Designing appropriate power converters is the topic of various studies. Method: In this paper, a novel bidirectional buck-boost multifunctional integrated converter is presented which is capable of handling battery and ...
متن کاملFractional Modeling and Analysis of Buck Converter in CCM Mode Peration
In this paper fractional order averaged model for DC/DC Buck converter in continues condition mode (CCM) operation is established. DC/DC Buck converter is one of the main components in the wind turbine system which is used in this research. Due to some practical restriction there weren’t exist input voltage and duty cycle of converter therefor whole of the wind system was simulated in Matlab/Si...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009