Design and Implementation of a 16-Bit Microprocessor Based Power Recorder
نویسنده
چکیده
In this paper we present the R and D work of making a 16 bit microprocessor based power recorder which can keep the record of the line voltage for twenty four hours at an interval of one minute. The sensor is used in the design is “variac” w ith half wave rectif ier. A 16 bit Microprocessor Learning/Development System using Intel 8086 Architecture have been used for interfacing the circuit. It can sense the line voltage from 0-250V. Index TermPow er Recorder, 16 bit Microprocessor, 8086 Architecture, variac, ADC ———————— ——————————
منابع مشابه
Modified 32-Bit Shift-Add Multiplier Design for Low Power Application
Multiplication is a basic operation in any signal processing application. Multiplication is the most important one among the four arithmetic operations like addition, subtraction, and division. Multipliers are usually hardware intensive, and the main parameters of concern are high speed, low cost, and less VLSI area. The propagation time and power consumption in the multiplier are always high. ...
متن کاملA Fast and Efficient On-Line Harmonics Elimination Pulse Width Modulation for Voltage Source Inverter Using Polynomials Curve Fittings
The paper proposes an algorithm to calculate the switching angles using harmonic elimination PWM (HEPWM) scheme for voltage source inverter. The algorithm is based on curve fittings of a certain polynomials functions. The resulting equations require only the addition and multiplication processes; therefore, it can be implemented efficiently on a microprocessor. An extensive angle error analysis...
متن کاملThe Design of Delay Insensitive Asynchronous 16-bit Microprocessor
In recent, asynchronous design has been resurged to exploit potential advantages of asynchronous VLSI such as; high-performance, low power consumption, timing fault tolerance and design cost reduction. This paper describes our first design and implementation of DINAMIK project which aims to show realizability of potential merits of asynchronous VLSI and to establish the design methodology. In t...
متن کاملFPGA Implementation of JPEG and JPEG2000-Based Dynamic Partial Reconfiguration on SOC for Remote Sensing Satellite On-Board Processing
This paper presents the design procedure and implementation results of a proposed hardware which performs different satellite Image compressions using FPGA Xilinx board. First, the method is described and then VHDL code is written and synthesized by ISE software of Xilinx Company. The results show that it is easy and useful to design, develop and implement the hardware image compressor using ne...
متن کاملA High-Speed Dual-Bit Parallel Adder based on Carbon Nanotube FET technology for use in arithmetic units
In this paper, a Dual-Bit Parallel Adder (DBPA) based on minority function using Carbon-Nanotube Field-Effect Transistor (CNFET) is proposed. The possibility of having several threshold voltage (Vt) levels by CNFETs leading to wide use of them in designing of digital circuits. The main goal of designing proposed DBPA is to reduce critical path delay in adder circuits. The proposed design positi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012