Design and test of a MEMS strain-sensing device for monitoring artificial knee implants
نویسندگان
چکیده
This paper describes the development of a polyimide-based MEMS strain-sensing device. Finite element analysis was used to investigate an artificial knee implant and assist on device design and to optimize sensing characteristics. The sensing element of the device was fabricated using polyimide micromachining with embedded thin-metallic wires and placed into a knee prosthesis. The device was evaluated experimentally in a mechanical knee simulator using static and dynamic axial load conditions similar to those encountered in vivo. Results indicates the sensor is capable of measuring the strain associated to the total axial forces in the range of approximately 4 times body weight with a good sensitivity and accuracy for events happening within 1 s time window.
منابع مشابه
Strain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers
Present paper investigated the strain and damage sensing property on concrete cubes embedded with carbon fibers. Concrete cubes of dimension 150 mm have been casted with different concentration of carbon fibers to study the strain and damage sensing property under cyclic loading that can be further used for health monitoring as non-destructive testing (NDT) approach. All the specimens were test...
متن کاملA Novel Offset Cancellation Based on Parasitic-Insensitive Switched-Capacitor Sensing Circuit for the Out-of-Plane Single-Gimbaled Decoupled CMOS-MEMS Gyroscope
This paper presents a novel parasitic-insensitive switched-capacitor (PISC) sensing circuit design in order to obtain high sensitivity and ultra linearity and reduce the parasitic effect for the out-of-plane single-gimbaled decoupled CMOS-MEMS gyroscope (SGDG). According to the simulation results, the proposed PISC circuit has better sensitivity and high linearity in a wide dynamic range. Exper...
متن کاملA High Performance Torque Sensor for Milling Based on a Piezoresistive MEMS Strain Gauge
In high speed and high precision machining applications, it is important to monitor the machining process in order to ensure high product quality. For this purpose, it is essential to develop a dynamometer with high sensitivity and high natural frequency which is suited to these conditions. This paper describes the design, calibration and performance of a milling torque sensor based on piezores...
متن کاملSuspension Vibration Compensation Using a Mems Microactuator in Hard Disk Drives
This paper discusses the design and fabrication of a prototype MEMS microactuator and vibration sensors, and controller design for suspension vibration compensation in disk drives. The microactuator utilizes parallel-plates actuation and comb-finger position sensing. An electrical isolation MEMS fabrication technique is utilized to increase the actuation force. An LQG method is proposed for vib...
متن کاملDesign of Piezoresistive MEMS-Based Accelerometer for Integration with Wireless Sensing Unit for Structural Monitoring
The use of advanced embedded system technologies such as microelectromechanical system ~MEMS! sensors and wireless communications hold great promise for measuring the response of civil structures to ambient and external disturbances. In this paper, the design of a high-performance, planar piezoresistive MEMS accelerometer is discussed in detail. The piezoresistive accelerometer possesses superi...
متن کامل