Metrology of Tomography for Engineering

December 16-21 2017 Abstract Tomographic imaging has unique features at “seeing” through the optical opaque medium and “building” up a volumetric view of multiphase dynamics in process pipelines or reactors in a nonintrusive manner. At other aspects, raw tomograms are reconstructed with a specific algorithm, which usually present distributions of a specific physical property of the process medium, e.g. the electrical conductivity of mixture in the use of electrical resistance tomography. However, these volumetric measurements are not conventionally understood, which may create a level of challenges in industrial application. Normally, specific theories or methods have to be employed to convert raw tomograms to meaningful engineering data. This paper reviews typical methods in tomographic data fusion and their implementations for process applications via a number of case studies carried out by the author and his team, providing a glance of view of the imaging metrology. The electrical resistance tomography is particularly expressed for measurement of various multiphase flows, including mixing processes, slurry, oil-in-water and gas-in-water two-phase flows, as well as 3-dimensional rendered flow regimes. It emphasises the important role of enginering data fusion in the metrology of tomography for engineering application.