Printed-Circuit RF-Keyed Crossed-Field Amplifier
نویسندگان
چکیده
This report describes an experimental and theoretical study of an RFkeyed linear format Crossed-Field Amplifier,(CFA), using a printed-circuit slow-wave structure. The theoretical results indicate that higher interaction impedances than have presently been obtained with printed-circuit slow-wave structures will be required to achieve the goal of low RF-keying levels. Experimental results indicate good agreement between theory and experiment for the phase velocity of the slow-wave structure and reasonable agreement between theory and experiment for the CFA.
منابع مشابه
AN1907 Solder Reflow Attach Method for High Power RF Devices in Over-Molded Plastic Packages
The purpose of this application note is to provide Freescale Semiconductor customers with a guideline for solder reflow mounting of high power RF transistors and integrated circuits in over-molded plastic (OMP) packages. This document will aid customers in developing an assembly process suitable for their design as well as their manufacturing operation. Each Power Amplifier (PA) design has its ...
متن کاملPerformance Improvement in Larger RF LDMOSFET Power Amplifiers
While larger transistors are used to deliver more power in RF transmitter power amplifiers, it has been observed that the performance per unit gate width decreases with increasing width. In this work, a major cause of this performance degradation in RF LDMOSFET power amplifiers is identified as the mutual inductance in the system, and a field solver and circuit simulator are used to quantify th...
متن کاملPackage and PCB Effects Shift Intermodulation Notch in an RF Common-Emitter Amplifier
A Taylor series analysis is conducted to study the effects of the package and printed circuit board (PCB) on the intermodulation nulling of an RF common-emitter amplifier. The equivalent parasitic element of the package and PCB interconnects is extracted from the impedance and admittance parameters, which are obtained using a three-dimensional (3-D) electromagnetic simulation tool. The theoreti...
متن کاملDesign and Analysis of Integrated RF Front-end Transceiver System Using Printed Circuit Technology for 5 GHz Wireless Communication Applications
The wireless market is developing very fast today with a steadily increasing number of users all around the world. An increasing number of users and the constant need for higher and higher data rates have led to an increasing number of emerging wireless communication standards. As a result there is a huge demand for flexible and low-cost radio architectures for portable applications. Modern rad...
متن کاملRadiofrequency Interference Filters Design Based on Complementary Split Rings Resonators
Low frequency analog and digital electronic circuits are susceptible to radiofrequency interference (RFI). This disturbance is produced when the coupled RF signal is rectified by the nonlinear behavior of the semiconductors used in the small signal analog input stages of the electronic system. These circuits present an AM demodulation effect produced by nonlinearity of internal transistors, gen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012