A Survey and Study of Different Types of Pwm Techniques Used in Induction Motor Drive
نویسندگان
چکیده
Switching power converters are used in industrial application to convert and deliver their required energy to the motor or lo ad because of advances in solid state power devices and microprocessors. Pulse Width Modulation variable speed drives are increasingly applied in many new industrial applications that require superior performance. The advantages of PWM based switc hing power converter over linear power amplifier are Lower power dissipation, Easy to implement and control, No temperature variation and aging-caused drifting or degradation in linearity and Compatible with today’s digital micro -processors. In this paper a survey and study of different types of pwm controlled methods are shown in thi s paper. The different PWM techniques are Single-pulse modulation, Multiple pulse modulation and Sinusoidal pulse width modulation (Carrier based Pulse Width Modulation Technique). SVPWM technique is explained in detail which improves the quality of the cu rrent and reduce the torque ripple in induction motor drive while maintaining the other performance characteristics of the system.
منابع مشابه
Comparison of MRAS Based Rotor Resistance Estimator Using Reactive Power and Flux Based Techniques for Space Vector PWM Inverter Fed Induction Motor Drives
The performance of Vector Controlled Induction Motor drive depends on the accuracy of rotor resistance which will vary with temperature and frequency. The MRAS approach using reactive power and flux as a state variable for rotor resistance estimation makes MRAS computationally simpler and easy to design. In this paper, Rotor Flux based MRAS (RF-MRAS) and Reactive Power based MRAS (RP-MRAS) for ...
متن کاملSpace Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter
Common-mode voltage (CMV) generated by the inverter causes motor bearing failures in multiphase drives.On the other hand, presence of undesired z-component currents in six-phase induction machine (SPIM) leads to extra current losses and have to be considered in pulse width modulation (PWM) techniques. In this paper, it is shown that the presence of z-component currents and CMV in six phase driv...
متن کاملApplication of Speed Estimation Techniques for Induction Motor Drives in Electric Traction Industries and vehicles
Induction motors are the most commonly used in the traction industries and electric vehicles, due to their low primary cost, low maintenance costs, and good performance. Speed identification is needed for the induction motor drives. However, using of speed sensors in the induction motor drives is associated with problems such as, extra cost, reduced reliability, added mounting space, etc.. Ther...
متن کاملA Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor
Shaft position sensing is an essential part of switched reluctance (SR) motor drive In order to synchronize the pulses of phase current with the period of rising inductance of the proper motor phase. Direct sensors such as, Hall effect and optical encoder are commonly used in SR motors. The purpose of this paper is to present an indirect shaft positioning sensing known as "sensorless " control ...
متن کاملEfficiency Improvement of Induction Motor using Fuzzy-Genetic Algorithm
In most industrial zones, electric energy is one of the most important energy sources. Since electrical motors are the main energy consumers of industrial factories, consumption optimization in these motors can be considered as a main option related to energy saving. One very effective way to reduce the consumption of these equipment is to use a motor speed controllers or drives. Since the loss...
متن کامل