A phenomenological one-parameter equation of state for osmotic pressures of PEG and other neutral flexible polymers in good solvents.

نویسندگان

  • J A Cohen
  • R Podgornik
  • P L Hansen
  • V A Parsegian
چکیده

We present a phenomenological one-parameter scaling equation of state that accurately represents osmotic pressures of neutral flexible polymers in good solvents from the dilute through the semidilute regime. The equation comprises a sum of scaled van't Hoff and des Cloizeaux terms including a fitted parameter alpha, the "crossover index", which encapsulates all chemical specificity and determines the relevant prefactors. Strikingly different values of alpha are found for the two very different systems poly(ethyleneglycol)/water (PEG) and poly(alpha-methylstyrene)/toluene (PAMS). Alpha-dependent rescaling collapses both data sets to a simple one-parameter scaling function. The fact that the anomalous system PEG/water and the canonical system PAMS/toluene can both be described by the same equation of state attests to the robustness of the polymer-scaling concepts introduced by de Gennes.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling Solubility Behavior of CO2 in [C2-mim][BF4] and [C4-mim][BF4] Ionic Liquids by sPC-SAFT Equation of State

The simplified perturbed chain statistical associating fluid theory (sPC-SAFT) Equation of State (EOS) was proposed to describe the thermodynamic properties of pure ionic liquids (ILs). A set of sPC-SAFT parameters for 2 ILs was obtained by fitting the experimental liquid densities data over a wide range of temperature at atmospheric pressure. Good agreement with experimental density data was o...

متن کامل

CALCULATION OF OSMOTIC PRESSURE USING A CLOSED SYSTEM MODEL

In this work we have used a closed system model to derive an analytical equation for the osmotic pressure of two component electrolyte and non-electrolyte solutions. In order to do so, we have used an equation of state, known as the dense system equation of state (DSEOS), for the model system. Based on the model, a new definition is given for the osmotic pressure of a closed system. Good ag...

متن کامل

Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State

Varnish and sludge formation are considered as one of the most common problems in lubrication and hydraulic systems. In order to simulate the condition of sludge formation, base stock lubricant (Group 1 API) has been selected and exposed to heat in a laboratory setup. Sludge formation process accelerated in the laboratory scale and solid liquid equilibrium data were extracted. Then solid-liquid...

متن کامل

Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates

Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...

متن کامل

An Analytical Equation of State for Molten Polymers

An analytical equation of state (EOS) developed by Ihm-Song-Mason (ISM) has been applied tocalculate some thermophysical properties of molten polymers including Poly (1-octene) (PO), Poly (vinylmethyl ether) (PVME), Poly (vinyl chloride) (PVC), and Poly (styrene) (PS). Three temperature-dependentparameters of the ISM EOS have been determined based on the alternative scaling constants, dispersiv...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The journal of physical chemistry. B

دوره 113 12  شماره 

صفحات  -

تاریخ انتشار 2009