Design control and implementation of a four-leg Matrix Converter for ground power supply application

The Nottingham ePrints service makes this work by researchers of the University of Nottingham available open access under the following conditions. · To the extent reasonable and practicable the material made available in Nottingham ePrints has been checked for eligibility before being made available. · Copies of full items can be used for personal research or study, educational, or not-for-profit purposes without prior permission or charge provided that the authors, title and full bibliographic details are credited, a hyperlink and/or URL is given for the original metadata page and the content is not changed in any way. · Quotations or similar reproductions must be sufficiently acknowledged. A note on versions: The version presented here may differ from the published version or from the version of record. If you wish to cite this item you are advised to consult the publisher's version. Please see the repository url above for details on accessing the published version and note that access may require a subscription. Abstract: The technology of direct AC/AC power conversion (Matrix Converters) is gaining increasing interest in the scientific community, particularly for aerospace applications. The aim of this research project is to investigate the use of direct AC/AC three phase four-leg Matrix Converter as ground power unit to supply aircraft with power during stopover or maintenance in airports. The converter fourth leg is used to provide a path for the zero sequence components when feeding unbalanced or non-linear loads. A high bandwidth controller is required to regulate the output voltage of Matrix Converter with a 400Hz output frequency. However, the controller bandwidth is limited due to the reduced ratio between the converter switching frequency and the fundamental frequency. In this case undesirable, periodic errors and distortion will exist in the output voltage above all in the presence of a non-linear or unbalanced load. Digital repetitive control system is proposed to regulate the output voltage of a four-leg Matrix Converter in an ABC reference frame. The proposed control structure introduces a high gain at the fundamental and its integer multiple frequencies. Using the proposed repetitive controller will reduce the tracking error between the output and the reference voltage, as well as increasing the stability of the converter under balanced and unbalanced load conditions. Simulation studies using SABER and MATLAB software packages show that the proposed controller is able to regulate the output voltage during balanced and unbalanced load conditions and during …