Surface smoothing and crystalline reorientation in thin cobalt films

Epitaxial cobalt films in the thickness range of 3.9 to 8.6 nm were deposited on Al2O3@112̄0# substrates by dc magnetron sputtering at a substrate temperature of 315 °C. In situ annealing was performed in a vacuum after which the samples were rapidly quenched to room temperature in order to preserve the high temperature structure. Ex situ atomic-force microscopy revealed that surface roughening takes place during annealing and reaches a maximum when the annealing temperature TA is equal to a critical temperature TC;500 °C. We discovered that if TA.TC the surface becomes smooth again, although large rectangular pits that go down to the substrate also appear. X-ray-diffraction data show that unannealed samples are oriented along the hcp@0001# direction. Upon annealing samples transform to a preferentially fcc@111# orientation for TA,TC , and subsequently to a fcc@001# orientation for TA.TC . We show that surface or interface oxidation cannot be the sole cause of this effect. We speculate that an increasing interface strain at higher temperatures or a surface reconstruction of the substrate are possible mechanisms. @S0163-1829~98!50128-2#