An Electromagnetically-Driven Piezoresistively Sensed CMOS MEMS Scanning Mirror for Projection Display
نویسندگان
چکیده
Bi-axial MEMS scanning mirrors are considered the key component for applications like laser scanning projectors and Lidars. Most studies have shown fabricated devices driven by open-loop operation without sensing, making it difficult to meet the requirements for practical applications. To facilitate bi-axial closed-loop operation, this work presents an electro magnetically-driven scanning mirror with piezoresistive sensing conveniently implemented in a CMOS (complementary metal oxide semiconductor) process. The measured resonant frequencies with respect to the slow and fast axes are 4.3 and 36.05 kHz, respectively, with the aim to provide SXGA display resolution.
منابع مشابه
5 V Compatible Two-Axis PZT Driven MEMS Scanning Mirror with Mechanical Leverage Structure for Miniature LiDAR Application
The MEMS (Micro-Electronical Mechanical System) scanning mirror is an optical MEMS device that can scan laser beams across one or two dimensions. MEMS scanning mirrors can be applied in a variety of applications, such as laser display, bio-medical imaging and Light Detection and Ranging (LiDAR). These commercial applications have recently created a great demand for low-driving-voltage and low-p...
متن کاملLCOS Spatial Light Modulators: Trends and Applications
Spatial light modulator (SLM) is a general term describing devices that are used to modulate amplitude, phase, or polarization of light waves in space and time. Current SLM–based systems use either optical MEMS (microelectromechanical system, [1]) or LCD technology [2]. In this chapter, we review trends and applications of SLMs with focus on liquid crystal on silicon (LCOS) technology. Most dev...
متن کاملCritical considerations of pupil alignment to achieve open-loop control of MEMS deformable mirror in non-linear laser scanning fluorescence microscopy
In this paper we present an alignment methodology for a non-linear laser scanning fluorescence microscopic imaging system integrated with a MEMS deformable mirror that is used to compensate microscope aberrations and improve sample image quality. The procedure uses an accurate open-loop control mechanism of the MEMS DM, a high resolution CMOS camera and a compact Shack-Hartmann wavefront sensor...
متن کاملFabrication of Electromagnetically-Driven Tilted Microcoil on Polyimide Capillary Surface for Potential Single-Fiber Endoscope Scanner Application
The design and fabrication of a Micro-electromechanical Systems (MEMS)-based tilted microcoil on a polyimide capillary are reported in this paper, proposed for an electromagnetically-driven single-fiber endoscope scanner application. The parameters of the tilted microcoil were optimized by simulation. It is proved that the largest driving force could be achieved when the tilt-angle, the pitch a...
متن کاملTorsional MEMS scanner design for high-resolution display systems
In scanning display systems, high horizontal and vertical resolution, and high refresh rate requirements translate into large mirror-size scan-angle product and high scanner-frequency requirements. A comparison between published scan-angle mirror-size product values for MEMS scanners and a Steel mechanical scanner is presented. Current performance levels of Steel mechanical scanners are better;...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017