Forced Convective Heat Transfer Enhancement in a Tube with its Core Partially Filled with a Porous Medium
نویسندگان
چکیده
Forced convection in a tube with its core partially filled with a porous medium is treated both analytically and numerically to find its high heat transfer performance. Assuming a fully developed flow subject to a constant heat flux, both friction factor and Nusselt number are presented explicitly as functions of the Reynolds number, Darcy number and porous core diameter ratio. Partial filling of the porous medium in the core region leads the fluid particles close to the wall, resulting an increase in the heat transfer coefficient. Extensive filling, however, tends to block the fluid particles channeling through the small gap formed between the wall and the porous core interface. Consequently, there exists the optimal porous core diameter ratio as a function of the Darcy number, which yields the maximum heat transfer coefficient.
منابع مشابه
Analytical Investigation of Forced Convection in Thermally Developed Region of a Channel Partially Filled with an Asymmetric Porous Material- LTNE Model
In present work forced convection flow in a channel partly filled with a porous media under asymmetric heat flux boundary condition has been investigated. The porous material is distributed on the one wall. Darcy–Brinkman and LTNE model have been assumed in order to solve momentum and energy equations, respectively. Fully developed conditions are considered in order to solve velocity and the te...
متن کاملNumerical study on convective heat transfer for water-based alumina nanofluids
The present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of Al2O3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.Laminar fully developed flow heat transfer coefficient of Al2O3 nanoparticles are dispersed in water in circular tube is discussed in this paper. In order to valid...
متن کاملNumerical study on convective heat transfer for water-based alumina nanofluids
The present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of Al2O3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.Laminar fully developed flow heat transfer coefficient of Al2O3 nanoparticles are dispersed in water in circular tube is discussed in this paper. In order to valid...
متن کاملConvective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts
متن کامل
Numerical modelling of double-diffusive natural convection within an arc shaped enclosure filled with a porous medium
Numerical study of double-diffusive natural convective heat transfer in a curved cavity filledwith a porous medium has been carried out in the current study. Polar system has beenselected as coordinate system. As a result, all equations have been discredited in r and θdirections. Brinkmann extended Darcy model has been utilized to express fluid flow inporous matrix in the enclosure. Smaller and...
متن کامل