Fabrication of Densely Packed AlN Nanowires by a Chemical Conversion of Al2O3Nanowires Based on Porous Anodic Alumina Film
نویسندگان
چکیده
Porous alumina film on aluminum with gel-like pore wall was prepared by a two-step anodization of aluminum, and the corresponding gel-like porous film was etched in diluted NaOH solution to produce alumina nanowires in the form of densely packed alignment. The resultant alumina nanowires were reacted with NH(3) and evaporated aluminum at an elevated temperature to be converted into densely packed aluminum nitride (AlN) nanowires. The AlN nanowires have a diameter of 15-20 nm larger than that of the alumina nanowires due to the supplement of the additional evaporated aluminum. The results suggest that it might be possible to prepare other aluminum compound nanowires through similar process.
منابع مشابه
Fabrication of Highly Ordered Gold Nanorods Film Using Alumina Nanopores
A simple method for fabrication of highly ordered gold nanorod film is introduced in this article. The procedure is based on thermal evaporation of gold into a porous anodic alumina film (PAA). The PPA film was fabricated by combining the hard and mild anodization. This combination effectively decreases the processing time of fabrication of highly ordered porous anodic alumina film with c...
متن کاملPorous anodic alumina on galvanically grown PtSi layer for application in template-assisted Si nanowire growth
We report on the fabrication and morphology/structural characterization of a porous anodic alumina (PAA)/PtSi nano-template for use as matrix in template-assisted Si nanowire growth on a Si substrate. The PtSi layer was formed by electroless deposition from an aqueous solution containing the metal salt and HF, while the PAA membrane by anodizing an Al film deposited on the PtSi layer. The morph...
متن کاملSynthesis and Characterization of Silver and Gold Nano-Structures on Chitosan-Porous Anodic Alumina Nano-Composite
This study was designed to probe the fabrication of unique silver and gold nano-structures engaging a self-designed chitosan-porous anodic alumina nano-composite as a template. Porous anodic alumina has been manufactured by di-step aluminum anodization in an oxalic acid electrolytic bath. The surface properties of porous anodic alumina were reinforced by chitosan neutralized in sodium hydro...
متن کاملFormation of aluminum nanodot array by combination of nanoindentation and anodic oxidation of aluminum
Porous alumina films formed by aluminum anodic oxidation have been intensively studied to use them as molds to form nanowires or dots. Recently we established the formation of porous alumina on solid substrates such as Si, and found a formation of an ordered aluminum hexagonal dot array after finishing of anodic oxidation on a SiO2 substrate. We investigated AFM nanoindentation to control the i...
متن کاملNuclear Instruments and Methods in
In digital X-ray sensors, pixel complexity is limited by the instabilities of amorphous silicon transistors or by the lack of homogeneity of their polycrystalline silicon counterparts. Here, we present a novel approach to the fabrication of thin-film transistors, based on the use of silicon nanowires grown in porous alumina templates. Transistors made from silicon nanowires are essentially stud...
متن کامل