AUV Self Noise Control and Acoustic Signature Meaurements
نویسندگان
چکیده
The long-term goals of this project are to develop techniques, which can be used in the design of AUV’s to minimize the radiated noise. The self noise from an AUV can interfere with acoustic sensors on board the AUV, specifically acoustic modem sensors and other sonar equipment. Hence the reduction of AUV noise and structural vibration is essentail in increasing the reliability of operation of the on-board acoustic sensors.
منابع مشابه
Active Noise Control in Pardis Coach using Different Fuzzy Controllers
In recent years, need to increase the convenience of trips in railway vehicles causes that train operators and manufacturers focus on reducing the noise level which is sensed by passengers. In this paper, first the state of modeling acoustic noise in cab train is discussed and natural frequencies and acoustic mode shapes are derived and then formulation of acoustic pressure in the cab will be o...
متن کاملUnderwater Wireless Communication System: Acoustic Channel Modeling and Carry Frequency Identification
This paper demonstrates the modeling of seawater acoustic channel to obtain the optimum carrier frequency for autonomous underwater vehicle (AUV) wireless communication system. The wireless communication distance of an AUV with its control vessel changes due to the mission at different depths. Current AUV is designed with an operating depth of 0 to 2000m. Therefore, the existing model had limit...
متن کاملAspect-dependent radiated noise analysis of an underway autonomous underwater vehicle.
This paper presents an analysis of the acoustic emissions emitted by an underway REMUS-100 autonomous underwater vehicle (AUV) that were obtained near Honolulu Harbor, HI using a fixed, bottom-mounted horizontal line array (HLA). Spectral analysis, beamforming, and cross-correlation facilitate identification of independent sources of noise originating from the AUV. Fusion of navigational record...
متن کاملAttitude Estimation for Intervention-AUVs Working in Tandem with Autonomous Surface Craft
This paper presents the design, analysis, and performance evaluation of an attitude filter for an Intervention-Autonomous Underwater Vehicle (I-AUV) working in tandem with an Autonomous Surface Craft (ASC). In the proposed framework, an ASC aids an I-AUV to determine its attitude by providing an inertial reference direction vector through acoustic modem communications, which is measured in body...
متن کاملکنترل مسیر خودکار میکرو زیردریایی 3 درجه آزادی با الهام از حرکت کوسهماهی
An autonomous underwater vehicle (AUV) with less noise and vortices as well as efficient power consumption, is pursued in this research by inspiration of shark swimming. Design, hydrodynamic analysis, modeling, fabrication, navigation, and control of this novel AUV is the main goal of this research. Detailed explanation of the test and experiment with a brief overview on fabrication are provide...
متن کامل