Flexible high-repetition-rate ultrafast fiber laser
نویسندگان
چکیده
High-repetition-rate pulses have widespread applications in the fields of fiber communications, frequency comb, and optical sensing. Here, we have demonstrated high-repetition-rate ultrashort pulses in an all-fiber laser by exploiting an intracavity Mach-Zehnder interferometer (MZI) as a comb filter. The repetition rate of the laser can be tuned flexibly from about 7 to 1100 GHz by controlling the optical path difference between the two arms of the MZI. The pulse duration can be reduced continuously from about 10.1 to 0.55 ps with the spectral width tunable from about 0.35 to 5.7 nm by manipulating the intracavity polarization controller. Numerical simulations well confirm the experimental observations and show that filter-driven four-wave mixing effect, induced by the MZI, is the main mechanism that governs the formation of the high-repetition-rate pulses. This all-fiber-based laser is a simple and low-cost source for various applications where high-repetition-rate pulses are necessary.
منابع مشابه
Waveguiding and nonlinear optical properties of three-dimensional waveguides in LiTaO3 written by high-repetition rate ultrafast laser
waveguides in LiTaO3 written by high-repetition rate ultrafast laser Ben McMillen, Kevin P. Chen, Honglin An, Simon Fleming, Vincent Hartwell, and David Snoke Department of Electrical and Computer Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA Optical Fibre Technology Centre, University of Sydney, Sydney, New South Wales 1430, Australia Department of Physics and Astr...
متن کاملHigh energy 3 µm ultrafast pulsed fiber laser.
In the paper, a 3 µm mid-infrared (MIR) high energy ultrafast Er:ZBLAN fiber laser and amplification system is presented. The 3µm seed pulses were generated through an Yb-doped ultrafast fiber laser pumped optical parametric amplification (OPA). A pulse energy of 12.4 µJ is generated at a repetition rate of 100 kHz with a pulse duration of 103 fs. A Er:ZBLAN fiber amplifier was used to further ...
متن کاملToward endoscopic ultrafast laser microsurgery of vocal folds
Vocal fold scarring can arise from disease or postsurgical wound healing and is one of the predominant causes of voice disorders. Focused ultrafast laser pulses have been previously demonstrated to create tightly confined sub-surface ablation in a variety of tissue, including vocal folds. Here, we demonstrate how we can take advantage of this unique ability of ultrafast laser ablation to create...
متن کاملA 5-mm piezo-scanning fiber device for high speed ultrafast laser microsurgery.
Towards developing precise microsurgery tools for the clinic, we previously developed image-guided miniaturized devices using low repetition rate amplified ultrafast lasers for surgery. To improve the speed of tissue removal while reducing device diameter, here we present a new 5-mm diameter device that delivers high-repetition rate laser pulses for high speed ultrafast laser microsurgery. The ...
متن کاملMicromachining with a High Repetition Rate Femtosecond Fiber Laser
Industrial micromachining applications with ultrashort pulse lasers are often difficult to make practical due to the lack of robustness of the laser and the slow processing speed resulting from the low repetition rate. In the past, amplified, femtosecond lasers produced high pulse energies, but at a slow pulse repetition rate of around a kHz. The high repetition rate oscillators did not have en...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 3 شماره
صفحات -
تاریخ انتشار 2013