Enhanced luminescence of GaN-based light-emitting diodes by selective wet etching of GaN/sapphire interface using direct heteroepitaxy laterally overgrowth technique

نویسندگان

  • Chien-Chih Kao
  • Yan-Kuin Su
  • Chuing-Liang Lin
  • Jian-Jhong Chen
چکیده

We introduce a method to enhance the luminescence of GaN-based LEDs by combining the direct heteroepitaxy laterally overgrowth (DHELO) technique with selective wet etching process. The epitaxial overgrowth of GaN layers on sapphire substrate with SiO2 micro-rods array exhibited a reduced dislocation density and improved the crystal quality. The EL intensity of LEDs with SiO2 micro-rods array was 6.5% higher than conventional LEDs at 20 mA. The selective wet etching process was then used to texture the LED sidewalls into inverted pyramid shape. Finally, the EL intensity could be further enhanced about 12.5% as compared with LEDs with SiO2 micro-rods array when adopting the textured sidewalls. 2011 Published by Elsevier B.V.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

GaN-based Light Emitting Diode with Embedded SiO2 Pattern for Enhanced Light Extraction

The n-GaN layer of c-plane GaInN/GaN light emitting diodes (LEDs) on sapphire was modified to contain a pattern of SiO2 nanorods. This embedded pattern of 300 nm long rods and diameter of 200 400 nm was created by thermal agglomeration of a Ni mask layer and subsequent dry-etching. The light output power (LOP) and external quantum efficiency (EQE) of the resulting LEDs increased both by some 25...

متن کامل

Nanorods on surface of GaN-based thin-film LEDs deposited by post-annealing after photo-assisted chemical etching

This study investigates the optoelectronic characteristics of gallium nitride (GaN)-based thin-film light-emitting diodes (TF-LEDs) that are formed by a two-step transfer process that involves wet etching and post-annealing. In the two-step transfer process, GaN LEDs were stripped from sapphire substrates by the laser lift-off (LLO) method using a KrF laser and then transferred onto ceramic sub...

متن کامل

Less strained and more efficient GaN light-emitting diodes with embedded silica hollow nanospheres

Light-emitting diodes (LEDs) become an attractive alternative to conventional light sources due to high efficiency and long lifetime. However, different material properties between GaN and sapphire cause several problems such as high defect density in GaN, serious wafer bowing, particularly in large-area wafers, and poor light extraction of GaN-based LEDs. Here, we suggest a new growth strategy...

متن کامل

InGaN-based light-emitting diodes with an embedded conical air-voids structure.

The conical air-void structure of an InGaN light-emitting diode (LEDs) was formed at the GaN/sapphire interface to increase the light extraction efficiency. The fabrication process of the conical air-void structure consisted of a dry process and a crystallographic wet etching process on an undoped GaN layer, followed by a re-growth process for the InGaN LED structure. A higher light output powe...

متن کامل

Strong Geometrical Effects in Submillimeter Selective Area Growth and Light Extraction of GaN Light Emitting Diodes on Sapphire.

Advanced semiconductor devices often utilize structural and geometrical effects to tailor their characteristics and improve their performance. We report here detailed understanding of such geometrical effects in the epitaxial selective area growth of GaN on sapphire substrates and utilize them to enhance light extraction from GaN light emitting diodes. Systematic size and spacing effects were p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Displays

دوره 32  شماره 

صفحات  -

تاریخ انتشار 2011