Ion-optical design of the focusing system in front of the Super-FRS target
نویسنده
چکیده
The new heavy-ion synchrotron SIS100 [2] will provide high-intensity beams at relativistic energies in the rigidity range (27-100) Tm. In order to produce secondary fragments, the ion beam will interact with the Super-FRS production target, where the beam spot is required to be about (1 × 2) mm in size. Therefore it is necessary to perform careful investigations of the transport beam line between the SIS100 and the Super-FRS. The last part, which consists of a large acceptance strong focusing system, has been investigated. Two options have been chosen for the construction planning:
منابع مشابه
Optimization of ion-beam profile with respect to stability of the liquid-Li target for Super-FRS
At FAIR intense energetic beams of uranium will be available for experiments at Super-FRS. A small focus spot of the uranium beam is crucial to ensure the resolution of the isotopes and the transmission of the secondary beam. It is necessary to investigate the stability of the production target after the energy deposition by intense ion beams to define the beam focusing limit. A liquid lithium ...
متن کاملDESIGN OF A SIMPLE LASER SYSTEM FOR NEPHELOMETRIC DETERMINATION OF ANIONS
A simple analytical system suitable for nephelometric measurements is introduced in this article. The electronic and optical components are simplified so that the apparatus is easily assembled from materials that are generally available. This instrument is designed for the efficient measurement of anions, and microgram quantities of ions may be determined by a convenient method of titration...
متن کامل3D hydrodynamic calculations of the Super-FRS liquid lithium target
A careful choice of the production target is very important for SUPER-FRS experiments at FAIR. A windowless liquid Lithium jet is one of the target configurations that are discussed [1]. Focusing of the primary beam improves the resolution of the isotopes and the transmission of the secondary beam, but can destroy the target. Analysis of the target behavior after the beam irradiation provides t...
متن کاملDYNAMICAL ANALYSIS AND DESIGN OF FRONT ENGINE ACCESSORY DRIVE SYSTEM
In this paper, Front Engine Accessory Drive (FEAD) system of automotive engine is modeled with ADAMS software. The model is validated using engine test data. It is then used to investigate the effect of design parameters on the system performance such as belt vibration and loads on the idlers. Three alternative layouts were developed in order to improve the performance of original EEAD system. ...
متن کاملElectro-Optical Design of Imaging Payload for a Remote Sensing Satellite
Remote sensing using small spacecraft arising from multi-objective economic activity problems is getting more and more developed. These satellites require very accurate pointing to specific locations of interest, with high reliability and small latency. The space borne imaging systems always attempted to achieve the highest ground resolution possible with the available technology at the given t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006