Balunless measurement of mixed-mode scattering parameters
ثبت نشده
چکیده
Significance of sdd21 in HF technology Increasing data volumes, as well as enormous increases in transfer speeds, place high demands on the signal quality. This is especially evident with the current interface USB 3.0, which is also known as SuperSpeed because of its transfer speed of 5 Gbps. While a common mode inductor was adequate for the previous version USB 2.0 with 480 Mbps to guarantee signal quality, special HF components are now needed for noise suppression. How these differ is shown by the Sdd21 measurement.
منابع مشابه
Mixed-Mode S-Parameter Characterization of Differential Structures
Combined differential-mode and common-mode (mixedmode) scattering parameters (s-parameters) are well adapted to accurate measurements of linear networks at RF and microwave frequencies. The relationships between standard s-parameters with two-port vector network analyzer (VNA) and mixed-mode s-parameters with four-port VNA are derived in this paper. An example differential structure was measure...
متن کاملModeling and Measurement of Mode-Conversion and Frequency Dependent Loss in High-Speed Differential Interconnections on Multilayer PCB
We propose an accurate and efficient model of having an unbalanced differential line structure, where mode-conversion and frequency dependent loss effects are considered in above the GHz frequency range. To extract model parameters of the proposed unbalanced differential line model, we measured s-parameters of test patterns using a 2-port VNA and defined a new type of mixed-mode s-parameter. Th...
متن کاملComprehensive Theoretical Study on Threshold Power of Stimulated Brillouin Scattering in Single-Mode Fibers
We have investigated and developed a theoretical approach to explore stimulated Brillouin scattering (SBS) phenomena in single mode fiber. SBS happening threshold power condition has been studied in terms of fiber parameters and input pump power. To assess threshold power precisely, the pump depletion effect and fiber loss has been included by employing 1% criterion. The threshold exponential g...
متن کاملMixed-Mode Stress Intensity Factors for Surface Cracks in Functionally Graded Materials Using Enriched Finite Elements
Three-dimensional enriched finite elements are used to compute mixed-mode stress intensity factors (SIFs) for three-dimensional cracks in elastic functionally graded materials (FGMs) that are subject to general mixed-mode loading. The method, which advantageously does not require special mesh configuration/modifications and post-processing of finite element results, is an enhancement of previou...
متن کاملAssembly Influence on the Small-Signal Parameters of a Packaged Transistor
A detailed analysis of the assembly influence on the small-signal parameters of a packaged transistor is presented. A new method, based on 3D field simulation and mixed-mode scattering parameters approach is proposed. Differences in scattering parameters caused by assembly change are computed using the new proposed method and compared to the standard method based on admittance matrix. The diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012